- Integrated ±15kV Transient Voltage Suppressors for D+ and D- Data Lines
- Pin Selectable Internal D+ and D- Termination Resistors (1.5kΩ ±5%)
- Integrated Microprocessor Reset Circuit with 100ms (min) Timeout
- 3.3V Output with ±3% Accuracy
- 25µA Quiescent Current at Full Load
- Small 1µF Output Capacitor
- Output to Input Reverse Leakage Protection
- Thermal and Short-Circuit Protection
- 10-Pin µMAX Package
The MAX5005/MAX5006/MAX5007 include an internal reset circuit that enables the USB microcontroller 100ms after the LDO regulator output voltage reaches regulation. Reset outputs are available in push-pull (active-low or active-high) and open-drain (active-low) options.
The MAX5005/MAX5006/MAX5007 are optimized for use with a 1µF ceramic output capacitor. Each device includes thermal shutdown protection, output short-circuit protection, and output to input reverse leakage protection. These devices also include an active-low manual reset input.
The MAX5005 features an open-drain reset output, the MAX5006 features an active-low push-pull reset output, and the MAX5007 features an active-high push-pull reset output. Each device is available in a space-saving 10-pin µMAX® package.