回到顶部
MyMaxim 订阅产品详情
主要特征
应用/用途
简化框图
Technical Docs
| 数据资料 | 150mA USB LDO线性稳压器，带有±15kV TVS及微处理器复位电路 | Dec 31, 2002 |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后，所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站，请创建一个新帐户。有关此样片网站的任何问题，请联系[email protected]。
主要特征
- Integrated ±15kV Transient Voltage Suppressors for D+ and D- Data Lines
- Pin Selectable Internal D+ and D- Termination Resistors (1.5kΩ ±5%)
- Integrated Microprocessor Reset Circuit with 100ms (min) Timeout
- 3.3V Output with ±3% Accuracy
- 25µA Quiescent Current at Full Load
- Small 1µF Output Capacitor
- Output to Input Reverse Leakage Protection
- Thermal and Short-Circuit Protection
- 10-Pin µMAX Package
应用/用途
- 手持式仪表(PDA、掌上电脑)
- USB外设
描述
The MAX5005/MAX5006/MAX5007 are low-dropout (LDO), micropower linear voltage regulators with an integrated microprocessor (µP) reset circuit for use with USB peripheral devices. Each device is available with a fixed +3.3V output voltage and can deliver up to 150mA load current. Each device features ±15kV transient voltage suppression (TVS) as well as precision 1.5kΩ data-line termination resistors for USB digital signals making them ideal for use with USB peripherals.
The MAX5005/MAX5006/MAX5007 include an internal reset circuit that enables the USB microcontroller 100ms after the LDO regulator output voltage reaches regulation. Reset outputs are available in push-pull (active-low or active-high) and open-drain (active-low) options.
The MAX5005/MAX5006/MAX5007 are optimized for use with a 1µF ceramic output capacitor. Each device includes thermal shutdown protection, output short-circuit protection, and output to input reverse leakage protection. These devices also include an active-low manual reset input.
The MAX5005 features an open-drain reset output, the MAX5006 features an active-low push-pull reset output, and the MAX5007 features an active-high push-pull reset output. Each device is available in a space-saving 10-pin µMAX® package.
The MAX5005/MAX5006/MAX5007 include an internal reset circuit that enables the USB microcontroller 100ms after the LDO regulator output voltage reaches regulation. Reset outputs are available in push-pull (active-low or active-high) and open-drain (active-low) options.
The MAX5005/MAX5006/MAX5007 are optimized for use with a 1µF ceramic output capacitor. Each device includes thermal shutdown protection, output short-circuit protection, and output to input reverse leakage protection. These devices also include an active-low manual reset input.
The MAX5005 features an open-drain reset output, the MAX5006 features an active-low push-pull reset output, and the MAX5007 features an active-high push-pull reset output. Each device is available in a space-saving 10-pin µMAX® package.
Technical Docs
| 数据资料 | 150mA USB LDO线性稳压器，带有±15kV TVS及微处理器复位电路 | Dec 31, 2002 |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后，所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站，请创建一个新帐户。有关此样片网站的任何问题，请联系[email protected]。
询价申请