回到顶部

独立的开关模式锂离子电池充电控制器

产品详情

主要特征

Parametric specs for Battery Chargers
Charging VIN (V) (max) 28
Max. ICHG (A) 4
Cell Chemistry Li-Ion
Li-Polymer
# Lithium Ion Cells 1
2
3
4
Protected VIN (V) (max) 28
Charger (V) 4 to 17.6
Oper. Temp. (°C) -40 to +85
Package/Pins QSOP/28
Budgetary
Price (See Notes)
3.08
缩小

简化框图

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

参量

Parametric specs for Battery Chargers
Charging VIN (V) (max) 28
Max. ICHG (A) 4
Cell Chemistry Li-Ion
Li-Polymer
# Lithium Ion Cells 1
2
3
4
Protected VIN (V) (max) 28
Charger (V) 4 to 17.6
Oper. Temp. (°C) -40 to +85
Package/Pins QSOP/28
Budgetary
Price (See Notes)
3.08

主要特征

  • Stand-Alone Charger for Up to Four Li+ Cells
  • ±0.8% Accurate Battery Regulation Voltage
  • Low Dropout: 98% Duty Cycle
  • Safely Precharges Near-Dead Cells
  • Continuous Voltage and Temperature Monitoring
  • < 1µA Shutdown Battery Current
  • Input Voltage Up to +28V
  • Safety Timer Prevents Overcharging
  • Input Current Limiting
  • Space-Saving 28-Pin QSOP
  • 300kHz PWM Oscillator Reduces Noise
  • 90% Conversion Efficiency

应用/用途

  • 台式摇篮架充电器
  • 手持式仪表(PDA、掌上电脑)
  • Li+电池组
  • 笔记本电脑

描述

The MAX1737 is a switch-mode lithium-ion (Li+) battery charger that charges one to four cells. It provides a regulated charging current and a regulated voltage with only a ±0.8% total voltage error at the battery terminals. The external N-channel switch and synchronous rectifier provide high efficiency over a wide input voltage range. A built-in safety timer automatically terminates charging once the adjustable time limit has been reached.

The MAX1737 regulates the voltage set point and charging current using two loops that work together to transition smoothly between voltage and current regulation. An additional control loop monitors the total current drawn from the input source to prevent overload of the input supply, allowing the use of a low-cost wall adapter.

The per-cell battery voltage regulation limit is set between +4.0V and +4.4V and can be set from one to four by pin strapping. Battery temperature is monitored by an external thermistor to prevent charging if the battery temperature is outside the acceptable range.

The MAX1737 is available in a space-saving 28-pin QSOP package. Use the evaluation kit (MAX1737EVKIT) to help reduce design time.

简化框图

MAX1737:典型工作电路 MAX1737:典型工作电路 Zoom icon

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心