回到顶部
产品详情
主要特征
应用/用途
Parametric specs for Battery Chargers
Package/Pins | UMAX/8 |
Budgetary Price (See Notes) | 1.57 |
缩小
简化框图
Technical Docs
参量
Parametric specs for Battery Chargers
Package/Pins | UMAX/8 |
Budgetary Price (See Notes) | 1.57 |
主要特征
- Simple Design Minimizes Heat
- Low Component Count, No Inductor
- Battery-Full Indicator
- 0.75% Accurate Battery Regulation
- 1.5µA (max) Battery Current Drain with Wall Cube Removed
- Restart Charging at 4.0V
- Continuous Overvoltage and Overtemperature Protection
- Safely Precharges Near-Dead Cells
- Automatic Power-Down when Power Source is Removed
- Charges 1 Cell from as Low as 4.5V
- Pin-Compatible Upgrade to MAX1679
应用/用途
- 蜂窝电话
- 消费类音频
- 无绳电话
- 数码相机
- 全球定位系统(GPS)
- 寻呼机
- 掌上电脑、手持终端
- 笔输入掌上电脑、PDA和数字助理
- 智能电池组/充电器
描述
The MAX1879 single-cell lithium-ion (Li+) battery charger utilizes an efficient pulse-charging architecture to minimize power dissipation in portable devices. This architecture combines the efficiency of switch-mode chargers with the simplicity and low cost of linear chargers. This simple device, in conjunction with a current-limited wall cube and a PMOS transistor, allows safe and fast charging of a single Li+ cell.
The MAX1879 initiates charging in one of three ways: battery insertion, charger power-up, or toggling the THERM pin. Key safety features include continuous voltage and temperature monitoring, a preset charger time-out, and an 8mA precharge current mode to charge near-dead cells. Automatic detection of input power removal shuts down the device, minimizing current drain from the battery. An overall system accuracy of 0.75% ensures that the cell capacity is fully utilized without cycle life degradation.
The MAX1879 is offered in a space-saving 8-pin µMAX® package. An evaluation kit (MAX1879EVKIT) is available to help reduce design time.
The MAX1879 initiates charging in one of three ways: battery insertion, charger power-up, or toggling the THERM pin. Key safety features include continuous voltage and temperature monitoring, a preset charger time-out, and an 8mA precharge current mode to charge near-dead cells. Automatic detection of input power removal shuts down the device, minimizing current drain from the battery. An overall system accuracy of 0.75% ensures that the cell capacity is fully utilized without cycle life degradation.
The MAX1879 is offered in a space-saving 8-pin µMAX® package. An evaluation kit (MAX1879EVKIT) is available to help reduce design time.