Top
/content/maximintegrated/en/applications/automotive/infotainment/automotive-display-power

Description

Automotive displays are getting bigger and brighter, delivering sharp images of the surrounding environment, automotive controls, and infotainment options. As automotive OEMs bring more autonomous vehicle functions to market, automotive displays will continue to play a critical role. To design an effective automotive display, you have to address (within the space constraints of these designs):

Reference Designs & Products

MAX16550 Integrated Protection IC on 12V Bus with an Integrated MOSFET, Lossless Current Sensing, and PMBus Interface

The MAX16550 is a protection IC with an integrated low-resistance MOSFET and lossless currentsen...
  • MAX16550—30A Protection ICn
  • High-Density (4mm x 4.5mm for 30A): Less than 25% of the Board Area of Conventional Solutions
    • Monolithic Integration of Power, Control, and Monitoring
    • Integrated Power MOSFET with 1.9mΩ Total Resistance in 12V Power Path (RDS(ON) Including Package)
    • Integrated Lossless, Precise Current Sensing
    • Integrated LDO Provides VDD Supply (1.8V Bias Supply)
  • Enables Advanced System Power Management—PMBus/SMBus Telemetry with Extensive Status Monitoring and Reporting
    • Load Current Indicator (ILOAD) Pin Provides Analog Output Current Reporting with High Accuracy
    • Programmable Soft-Start for Inrush Current Limiting
    • Increases Power-Supply Reliability with IC Self-Protection Features
      • Very Fast Fault Detection and Isolation
      • VIN to VOUT Short Protection During Startup
      • Overtemperature Protection
    • Three Levels of Overcurrent Protection
      • Programmable Moderate OCP
      • Programmable Severe OCP Provides Isolation < 5µs.
      • Fail-Safe Safe OCP Provides Isolation < 250ns.

MAX9641 Low-Power, Dual Hall-Effect Sensor

The MAX9641 is dual, low-power Hall-effect sensor. Using two sensors spaced apart on the die, it...
  • 1.7V to 5.5V Supply Voltage Range
  • Ultra-Low Supply Current
  • Adjustable Thresholds
  • Adjustable Duty Cycle
  • Direction Indicator
  • CMOS Output Eliminates the Need for an External Pull-Up Resistor
  • Tiny 1.2mm x 1.7mm, 6-Bump WLP
  • -40°C to +125°C Temperature Range

MAX20419 High-Efficiency, 3-Output, Low-Voltage DC-DC Converter

The MAX20419 is a high-efficiency, 3-output, low-voltage DC-DC converter IC. OUT1 boosts the inp...
  • Multiple Functions for Small Size
    • Synchronous 750mA Boost Converter
    • Fixed at 5V Output
    • Dual Synchronous Buck Converters Up to 3.6A
      • Factory-Configurable from 0.8V to 3.8V in 25mV Steps
    • Programmable Windowed Watchdog
    • 3.0V to 5.5V Operating Supply Voltage
    • 2.2MHz Operation
    • Individual Active-Low RESET_ Outputs
    • High-Precision Performance
      • ±1.9% Output-Voltage Accuracy (OUT1) and
      • ±1.4% Output-Voltage Accuracy (OUT2, OUT3)
      • ±1.3% OV/UV Monitoring (OUT1–OUT3, PV)
    • Excellent Load-Transient Performance
  • Diagnostics and Redundant Circuits
    • ASIL-C Compliant
    • Redundant Reference
    • Fail Safe on Open Pins
    • Shorted Pin Detection Active Low-RESET1–RESET3
    • Input Overvoltage Detection
  • Robust for the Automotive Environment
    • Current Mode, Forced-PWM and Skip Operation
    • Overtemperature and Short-Circuit Protection
    • 24-Pin (4mm x 4mm) TQFN with Exposed Pad
    • -40 °C to +125 °C Automotive Temperature Range

MAX19526 Ultra-Low-Power, 8-Channel, 12-Bit, 40Msps ADC

  • 69dB SNR for Excellent Receiver Sensitivity and Image Resolution
  • 8 Channels in a Small (10mm x 10mm) Package for Multichannel Receiver Architectures
  • Ultra-Low Power for Reduced Heat Dissipation and Improved Reliability
  • Serial LVDS Outputs for Reduced FPGA Interface Pin Count, Reduced PCB Layout Complexity, and Reduced Digital-Interface Radiated RF Emissions
  • Programmable Serial Test Patterns for Improved Ease of Design and Test

MAX11020 1.5Msps, 8-Bit, Low-Power SAR ADC with Parallel Interface

The MAX11020 is a 1.5Msps, low-power, 8-channel, 8-bit SAR ADC with a parallel interface. It fea...
  • 8-Bit Resolution
  • 1.5Msps SAR ADC with No Pipeline Delays
  • Excellent DC Performance: ±1.75 LSB INL, -1 to +1.75 LSB DNL
  • Excellent AC Performance
  • 5MHz Full-Power Linear Bandwidth
  • Programmable Single-Ended or Differential Input Modes
  • Programmable Unipolar or Bipolar Input Range
  • Internal 2.048V or External Reference
  • 24MHz Parallel Interface 10-Bit Wide or Byte-Wide Output with LSB or MSB Justified Data Format
  • Separate VL Supply Seamless Interface to +1.8V DVDD Digital Logic
  • +2.7V to +5.25V, Single-Supply Operation
  • Low Supply Current
  • 40-Pin, 6mm x 6mm Thin QFN Package
  • MAX19528 Ultra-Low-Power, 8-Channel, 12-Bit, 64Msps ADC

    • 69dB SNR for Excellent Receiver Sensitivity and Image Resolution
    • 8 Channels in a Small (10mm x 10mm) Package for Multichannel Receiver Architectures
    • Ultra-Low Power for Reduced Heat Dissipation and Improved Reliability
    • Serial LVDS Outputs for Reduced FPGA Interface Pin Count, Reduced PCB Layout Complexity, and Reduced Digital-Interface Radiated RF Emissions
    • Programmable Serial Test Patterns for Improved Ease of Design and Test

    MAX9640 Low-Power, Single Hall-Effect Sensors

    The MAX9639 is a single omni-polar Hall effect switch. It has an output that is asserted if the ...
    • 1.7V to 5.5V Supply Voltage Range
    • Ultra-Low Supply Current
    • Adjustable Thresholds (MAX9639)
    • Polarity Indicator (MAX9640)
    • CMOS Output Eliminates the Need for an External Pull-Up Resistor
    • Operation with North or South Pole
    • Tiny 4-Bump WLP (1.2mm x 1.2mm x 0.6mm)
    • -40°C to +125°C Temperature Range

    MAX9639 Low-Power, Single Hall-Effect Sensors

    The MAX9639 is a single omni-polar Hall effect switch. It has an output that is asserted if the ...
    • 1.7V to 5.5V Supply Voltage Range
    • Ultra-Low Supply Current
    • Adjustable Thresholds (MAX9639)
    • Polarity Indicator (MAX9640)
    • CMOS Output Eliminates the Need for an External Pull-Up Resistor
    • Operation with North or South Pole
    • Tiny 4-Bump WLP (1.2mm x 1.2mm x 0.6mm)
    • -40°C to +125°C Temperature Range

    MAX19538 12-Bit, 95Msps, 3.3V ADC

    The MAX19538 is a 3.3V, 12-bit, 95Msps analog-to-digital converter (ADC) featuring a fully diffe...
    • Direct IF Sampling Up to 400MHz
    • Excellent Dynamic Performance
      • 70.9dB/68.4dB SNR at fIN = 3MHz/175MHz
      • 89.0dBc/76.2dBc SFDR at fIN = 3MHz/175MHz
      • -71.5dBFS Small-Signal Noise Floor
    • 3.3V Low-Power Operation
      • 465mW (Single-Ended Clock Mode)
      • 492mW (Differential Clock Mode)
      • 63µW (Power-Down Mode)
    • Fully Differential or Single-Ended Analog Input
    • Adjustable Full-Scale Analog Input Range: ±0.35V to ±1.10V
    • Common-Mode Reference
    • CMOS-Compatible Outputs in Two's Complement or Gray Code
    • Data-Valid Indicator Simplifies Digital Design
    • Data Out-of-Range Indicator
    • Miniature 6mm x 6mm x 0.8mm 40-Pin Thin QFN Package with Exposed Paddle
    • Evaluation Kit Available (Order MAX1211EVKIT)

    MAX1211 12-Bit, 65Msps, IF Sampling ADC

    The MAX1211 is a 3.3V, 12-bit analog-to-digital converter (ADC) featuring a fully differential w...
    • Direct IF Sampling Up to 400MHz
    • 700MHz Input Bandwidth
    • Excellent Dynamic Performance
      • 66.8dB SNR at fIN = 175MHz
      • 79.7dBc SFDR at fIN = 175MHz
    • 3.3V Low-Power Operation
      • 314mW (Single-Ended Clock Mode)
      • 340mW (Differential Clock Mode)
    • Differential or Single-Ended Clock
    • Accepts 20% to 80% Clock Duty Cycle
    • Fully Differential or Single-Ended Analog Input
    • Adjustable Full-Scale Analog Input Range
    • Common-Mode Reference
    • Power-Down Mode
    • CMOS-Compatible Outputs in Two's Complement or Gray Code
    • Data-Valid Indicator Simplifies Digital Interface
    • Out-of-Range Indicator
    • Miniature, 40-Pin Thin QFN Package with Exposed Paddle
    • Evaluation Kit Available (Order MAX1211EVKIT)

    MAX1123 1.8V, 10-Bit, 210Msps Analog-to-Digital Converter with LVDS Outputs for Wideband Applications

    The MAX1123 is a monolithic 10-bit, 210Msps analog-to-digital converter (ADC) optimized for outs...
    • 210Msps Conversion Rate
    • SNR = 57.4dB/56dB at fIN = 100MHz/500MHz
    • SFDR = 74.5dBc/62.6dBc at fIN = 100MHz/500MHz
    • NPR = 53.6dB at fNOTCH = 28.8MHz
    • Single 1.8V Supply
    • 460mW Power Dissipation at 210Msps
    • On-Chip Track-and-Hold and Internal Reference
    • On-Chip Selectable Divide-by-2 Clock Input
    • LVDS Digital Outputs with Data Clock Output
    • Evaluation Kit Available (Order MAX1124EVKIT)

    MAX1193 Ultra-Low-Power, 45Msps, Dual 8-Bit ADC

    The MAX1193 is an ultra-low-power, dual, 8-bit, 45Msps analog-to-digital converter (ADC). The de...
    • Ultra-Low Power
      • 57mW (Normal Operation: 45Msps)
      • 0.3µW (Shutdown Mode)
    • Excellent Dynamic Performance
      • 48.5dB/48.3dB SNR at fIN = 5.5MHz/100MHz
      • 70dBc/68dBc SFDR at fIN = 5.5MHz/100MHz
    • 2.7V to 3.6V Single Analog Supply
    • 1.8V to 3.6V TTL/CMOS-Compatible Digital Outputs
    • Fully Differential or Single-Ended Analog Inputs
    • Internal/External Reference Option
    • Multiplexed CMOS-Compatible Tri-State Outputs
    • 28-Pin Thin QFN Package
    • Evaluation Kit Available (Order MAX1193EVKIT)

    MAX40204 36V, Pin-Programmable Gain, Bidirectional CSA

    The MAX40204 is a high-precision, bidirectional, high-side current-sense amplifier (CSA) with a ...
    • -0.1V to 36V Wide Input Common Mode
    • Ultra-Low, 2μV Input Offset Voltage
    • On-the-Fly Gain Setting Input
    • Bidirectional/Unidirectional Current Sensing
    • 20nA (max) Input Bias Current
    • Extremely Low, 50nV/°C Input Offset Tempco
    • 0.05% Gain Error
    • 21μA Supply Current
    • 70nA (typ) Shutdown Current
    • 1.7V to 5.5V Single Supply Operating Range
    • Space-Saving 8-Bump WLP and 8-Pin TDFN Packages

    Technical Documentation

    Technical Documentaion

    *Required

    Technical Documentaion

    Technical Documents

    Showing 10 of View Top 100 Results View All Results

    Part Number Title Document Type Date

    Support & Training

    Automotive Display Power