Top
/content/maximintegrated/en/applications/automotive/products/aec-q100-products/automotive-v-flow-drives-products-to-zero-defects

Description

Automotive "V" Flow Drives Products to Zero Defects

Maxim's "V" (Vehicle) flow has the following distinctive attributes:

  • Full ISO/TS 16949:2002- and ISO 9001:2008-Certified Quality Management System
  • Full ISO 14001:2004-Certified Environmental Management System
  • AEC-Q100-Qualified Parts for Specified Temperature Grades
  • Statistical Process Controls to Cpk ≥ 1.67 on All Key Parameters
  • Statistical Test Methodologies*: SYA, SBL, PAT, IDDQ, JVT, and BIST
  • PPAP (Production Part Approval Process) Available
  • Restriction to a Maximum of Two Qualified Production Sites for Wafer, Assembly, and Test
  • Global Failure-Analysis Support Centers Improve Customer Support
  • Worldwide Field Quality Support—Europe, Asia, Japan, and North America
  • Limited Product Change Control System and Extended PCN Horizons

*As applicable.

Select Maxim's "V" products, like the MAX2141ETH/V+, to receive AEC-Q100-qualified automotive parts.

Reference Designs & Products

MAX17310 1-Cell ModelGauge m5 EZ Fuel Gauge with Protector and SHA-256 Authentication

MAX17310 1-Cell ModelGauge m5 EZ Fuel Gauge with Protector and SHA-256 Authentication

The MAX17300–MAX17303/MAX17310–MAX17313 is a 24μA IQ stand-alone pack-side fuel gauge IC with pr...
  • Battery Health + Programmable Safety/Protection
    • Overvoltage (Temperature Dependent)
    • Overcharge Current 
    • Over/Undertemperature
    • Battery Internal Self-Discharge Detection (MAX17300/10 Only)
    • Ideal Diode Discharge During Charge Fault
    • Charging Prescriptions (JEITA)
    • Zero-Volt Charging Option
    • Undervoltage + SmartEmpty
    • Overdischarge/Short-Circuit 
  • Nonvolatile Memory for Stand-Alone Operation
    • ​History Logging, User Data (122 Bytes)
  • Low Quiescent Current
    • FETs Enabled: 24µA Active, 18µA Hibernate
    • FETs Disabled: 5µA Ship, 0.5µA/0.02µA DeepShip
  • Parallel Battery Management (MAX17300/10 Only)
  • Pushbutton Wakeup—Eliminates System Consumption Until Button Press
  • ModelGauge m5 EZ Algorithm
    • Percent, Capacity,Time-to-Empty/Full, Age
    • Cycle+™ Age Forecast
  • Dynamic Power—Estimates Power Capability
  • Precision Measurement Without Calibration
    • ​Current, Voltage, Power, Time, Cycles
    • Die Temperature​/Thermistor

MAX20411 Automotive High-Efficiency Single 16A/22A/ 30A/40A Step-Down Converter Family

The MAX20411 is a family of high-efficiency, synchronous step-down converters that operate with ...
  • High-Efficiency DC-DC Converter
  • Up to 40A Peak Output Current:
    • MAX20411A: 16A
    • MAX20411B: 22A
    • MAX20411C: 30A
    • MAX20411D: 40A
  • Differential Remote Voltage Sensing
  • 3.0V to 5.5V Operating Supply Voltage
  • I²C Controlled Output Voltage:
    • 0.5V to 1.275V in 6.25mV Steps
  • Excellent Load Transient Performance
  • Advanced Programmable Compensation
    • MAXQ™ Power Architecture
    • Hybrid Load Line and Integrator Options
  • 2.1MHz or 1.05MHz Operation
  • As Low as ±0.75% Output Voltage Accuracy
  • RESET-bar Output
  • Current Mode, Forced PWM Operation
  • ASIL D Compliant:
    • Redundant Reference
    • BIST Diagnostics
    • PEC on I²C
    • Programmable OV/UV with ±1% Accuracy
  • Overtemperature and Short-Circuit Protection
  • 3.5mm x 5mm 21-Pin Side-Wettable FC2QFN
  • -40°C to +125°C Grade 1 Automotive Temperature Range

MAX25206 Versatile Automotive 60V/70V 2.2MHz Buck Controller with 7µA IQ and Optional Bypass Mode

The MAX25206/MAX25207/MAX25208 are automotive 2.2MHz synchronous step-down controller IC with 7µ...
  • Meets Stringent OEM Module Power Consumption and Performance Specifications
    • 7µA Quiescent Current in Skip Mode at VOUT = 3.3V
    • ±1.5% Output-Voltage Accuracy: 5.0V/3.3V Fixed, or Adjustable Between 1V and 10V
  • Enables Crank-Ready Designs
    • Wide Input Supply Range from 3.5V to 42V
  • EMI Reduction Features Reduce Interference with Sensitive Radio Bands without Sacrificing Wide Input Voltage Range
    • 50ns (typ) Minimum On-Time Guarantees Skip-Free Operation for 3.3V Output from Car Battery at 2.2MHz
    • Spread-Spectrum Option
    • Frequency-Synchronization Input
    • Resistor-Programmable Frequency Between 220kHz and 2.2MHz
  • Integration and Thermally Enhanced Packages Save Board Space and Cost
    • 2.2MHz Step-Down Controller
    • 180° Out-of-Phase SYNCOUT Output for Synchronization
    • Current-Mode Controller with Forced-Continuous and Skip Modes
    • Thermally Enhanced 20-Pin Side-Wettable (SW) TQFN-EP Package
  • Protection Features Improve System Reliability
    • Supply Undervoltage Lockout
    • Overtemperature and Short-Circuit Protection
    • Output Overvoltage and Undervoltage Monitoring
    • -40°C to +125°C Grade 1 Automotive Temperature Range

MAX22207 36V, 3.5A Brushed Motor Driver with Integrated Current Sense

The MAX22201/MAX22202/MAX22207 integrate one 36V, 3.5A peak full bridge capable of driving one b...
    One Full H-Bridge with +36V Voltage Rating
  • Total RDS(ON) (High Side + Low Side): 300mΩ (typ) (TA = +25°C)
  • Current Ratings (+25°C typ)
  • IPEAK = 3.5A
  • IRMS = 2A
  • Configurable Current Drive Regulation (CDR) for Limiting Stall and Inrush Current
  • Configurable Off Time (tOFF) for CDR (MAX22201 only)
  • Lossless Integrated Current Sensing (ICS) Eliminates External Bulky Resistors and Saves Power
  • Current Sense Output (CSO) Function: A Replica of the Internally Sensed Current is Output on the ISEN Pin
  • Current Drive Regulation Monitor (CDROUT) (MAX22207 only)
  • Fault Indicator pin (Active-Low FAULT)
  • Fully Integrated Charge Pump
  • Protections
  • Overcurrent Protection for Each Individual Channel (OCP)
  • Undervoltage Lockout (UVLO)
  • Thermal Shutdown (TSD) T = +165°C
  • ESD Protection 8kV HBM (OUT1 and OUT2 Pins)
  • Ultra-Small Package TDFN12 3mm x 3mm

MAX20057 36V Boost Controller with Two Synchronous Buck Converters (3.5A/2A) for Automotive Applications

The MAX20057 is an automotive highly integrated triple-output PMIC. It includes two synchronous ...
  • Meets Stringent OEM Module Power Consumption and Performance Specifications
    • 10µA Supply Current with 5V Buck On
    • 8µA Supply Current with 3.3V Buck On
    • 30µA Supply Current with All Regulators On
  • Enables Crank-Ready Designs
    • Output Voltages in Regulation Through Cold CrankDown to 2V Battery Voltage
    • Wide Input-Supply Range from 3.5V to 36V
    • EMI Reduction Features Reduce Interference with Sensitive Radio Bands without Sacrificing Wide Input-Voltage Range
    • 20ns (typ) Minimum On-Time Guarantees Skip-Free Operation for 3.3V Output at 2.1MHz
    • Spread-Spectrum Option
    • Phase-Locked Loop (PLL) Frequency Synchronization
  • Integration and Thermally Enhanced Packages Save Board Space and Cost
    • Two 2.1MHz Buck Converters with Asynchronous Boost Controller
    • Current-Mode Controller with Forced Fixed-Frequency and Skip Modes
    • Thermally Enhanced 5mm x 5mm, 28-Pin TQFN-EP Package
  • Protection Features Improve System Reliability
    • Supply Undervoltage Lockout
    • Overtemperature and Short-Circuit Protection

MAX16162 nanoPower Supply Supervisors with Glitch-Free Power-Up

The MAX16161/MAX16162 are ultra-low current, singlechannel supervisory ICs. The devices monitor ...
  • No Powerup Glitch: (See Reliable Supervisor for Low-Voltage Processor Cores)
  • 825nA (typ) Quiescent Current Extends Battery Life
  • Positive and Negative Level-Triggered MR Input Options (MAX16161)
  • MR Debounce Circuitry (MAX16161)
  • Separate VCC and VIN Inputs (MAX16162)
  • Multiple Available Reset Timeout Periods
  • Threshold Voltage Options
  • 1.7V to 4.85V (MAX16161)
  • 0.6V to 4.85V (MAX16162)
  • 4-Bump WLP and 4-Pin SOT23 Packages
  • -40°C to +125°C Operating Temperature Range

MAX33042E +5V, 4Mbps CAN Transceiver with ±40V Fault Protection, ±25V CMR, and ±40kV ESD in SOT23/8

The MAX33042E is a +5V CAN transceiver with integrated protection for industrial applications. T...
  • Integrated Protection Increases Robustness
    • Increased Protection on CANH and CANL
      • ±40V Fault Tolerant
      • ±40kV ESD HBM Protection
      • ±12kV Contact and ±15kV Air-Gap ESD (ISO 10605, IEC 61000-4-2) Protection
      • ±25V Extended Common-Mode Input Range (CMR)
      • Short-Circuit Protection
    • Transmitter-Dominant Timeout Prevents Lockup
    • Thermal Shutdown
  • Provides Flexible Design Options
    • Slow Slew Rate to Minimize EMI
    • Low-Current Standby Mode
    • Shutdown Pin to Save Power
  • Small Package Option to Save PCB Area
    • 8-Pin SOT23
  • High-Speed Operation of up to 4Mbps
  • Operating Temperature Range of -40°C to +125°C
  • MAX20429 Dual 6A High-Efficiency Low Voltage Buck Converter

    The MAX20429 is a high-efficiency dual switching regulator that delivers up to 6A (peak) load cu...
    • High-Feature Set in an Ultra-Small Footprint
      • High-Efficiency DC-DC Converter
      • Two Independent Outputs, up to 6A per Output
      • 3.0V to 5.5V Operating Supply Voltage
      • Resistor-Adjustable Output Voltage
      • Optional Factory-Preset Output Voltage
      • 2.1MHz/3.2MHz Options
      • Enable Input
      • Individual Active-Low RESET Outputs
      • Spread-Spectrum Option
      • Peak Current-Mode Architecture
      • 3mm x 3.5mm FCQFN
    • High-Precision
      • 108/92% OV/UV Monitor
      • ±3% OV/UV Accuracy
      • ±1% Output Voltage Accuracy
      • Excellent Load-Transient Performance
      • PWM and SKIP Mode Operation
      • MAXQTM Power Architecture
    • High Efficiency
      • Up to 96% Efficiency 5V to 3.3V
      • Up to 90% Efficiency 5V to 1V
    • -40°C to +125°C Operating Temperature Range
    • AEC-Q100 Qualified

    MAX20419 High-Efficiency, 3-Output, Low-Voltage DC-DC Converter

    The MAX20419 is a high-efficiency, 3-output, low-voltage DC-DC converter IC. OUT1 boosts the inp...
    • Multiple Functions for Small Size
      • Synchronous 750mA Boost Converter
      • Fixed at 5V Output
      • Dual Synchronous Buck Converters Up to 3.6A
        • Factory-Configurable from 0.8V to 3.8V in 25mV Steps
      • Programmable Windowed Watchdog
      • 3.0V to 5.5V Operating Supply Voltage
      • 2.2MHz Operation
      • Individual Active-Low RESET_ Outputs
      • High-Precision Performance
        • ±1.9% Output-Voltage Accuracy (OUT1) and
        • ±1.4% Output-Voltage Accuracy (OUT2, OUT3)
        • ±1.3% OV/UV Monitoring (OUT1–OUT3, PV)
      • Excellent Load-Transient Performance
    • Diagnostics and Redundant Circuits
      • ASIL-C Compliant
      • Redundant Reference
      • Fail Safe on Open Pins
      • Shorted Pin Detection Active Low-RESET1–RESET3
      • Input Overvoltage Detection
    • Robust for the Automotive Environment
      • Current Mode, Forced-PWM and Skip Operation
      • Overtemperature and Short-Circuit Protection
      • 24-Pin (4mm x 4mm) TQFN with Exposed Pad
      • -40 °C to +125 °C Automotive Temperature Range

    MAX16161 nanoPower Supply Supervisors with Glitch-Free Power-Up

    The MAX16161/MAX16162 are ultra-low current, singlechannel supervisory ICs. The devices monitor ...
    • No Powerup Glitch: (See Reliable Supervisor for Low-Voltage Processor Cores)
    • 825nA (typ) Quiescent Current Extends Battery Life
    • Positive and Negative Level-Triggered MR Input Options (MAX16161)
    • MR Debounce Circuitry (MAX16161)
    • Separate VCC and VIN Inputs (MAX16162)
    • Multiple Available Reset Timeout Periods
    • Threshold Voltage Options
    • 1.7V to 4.85V (MAX16161)
    • 0.6V to 4.85V (MAX16162)
    • 4-Bump WLP and 4-Pin SOT23 Packages
    • -40°C to +125°C Operating Temperature Range

    MAX33045E 20Mbps, Half-Duplex RS-485/RS-422 Transceivers with ±40kV ESD Protection

    The MAX33045E/MAX33046E is a half-duplex RS-485/422 transceiver that operates at either 3.3V or ...
    • Integrated Protection Increases Robustness
      • ±25V Fault-Protection Range on Driver Outputs/Receiver Inputs
      • High-ESD Protection
        • ±40kV HBM ESD per JEDEC JS-001
        • ±15kV Air-Gap ESD per IEC 61000-4-2
        • ±10kV Contact ESD per IEC 61000-4-2
      • Short-Circuit-Protected Outputs
      • True Fail-Safe Receiver Prevents False Transition on Receiver Input Short or Open Events
      • Hot-Swap Capability Eliminates False Transitions on Receiver Input Shorts or Open Events
    • High-Speed Data Rates up to 20Mbps
    • Enables up to 256 Nodes on the Bus
    • Wide -40°C to +125°C Operating Temperature Range

      MAX20812 Dual-Output 6A, 3Mhz, 2.7V to 16V, Step-Down Switching Regulator

      The MAX20812 is a dual-output, fully integrated, highly efficient, step-down DC-DC switching reg...
      • High Power Density with Low Component Count
        • Dual-Output or Dual-Phase Operation
        • Single-Supply Operation with Integrated LDO for Bias Generation
        • Optional 2.5V to 5.5V External Bias for Higher Efficiency
        • Compact 3.5mm x 4.6mm, 21-Pin, FC2QFN Package
        • Internal Compensation
      • Wide Operating Range
        • 2.7V to 16V Input Voltage Range
        • 0.5V to 5.8V Output Voltage Range
        • 500kHz to 3MHz Configurable Switching Frequency
        • -40°C to +125°C Junction Temperature Range
        • Three Pin-Strap Programming Pins to Select Different Configurations
        • Independent Enable and Power Good for Each Output
      • Optimized Performance and Efficiency
        • 92.5% Peak Efficiency with VDDH = 12V, VOUT = 1.8V, and fSW = 1MHz
        • Interleaved 180° Out-of-Phase Operation
        • Selectable AMS to Improve Load Transient
        • Selectable DCM to Improve Light Load Efficiency
        • Active Current Balancing for Dual-Phase Operation

      MAX38913 4µVRMS Ultra-Low-Noise 1A LDO with Two-Level Output-Voltage Selection

      The MAX38913 is a low-noise linear regulator that delivers up to 1A of load current with as low ...
      • Delivers Flexible Output Range
        • 1.8V to 5.5V Input Voltage Range
        • 0.6V to 5.0V Output Voltage Range
        • 1A Maximum Output Current
        • 28mV Dropout at 1A Load Current and 5.0V Supply
        • 33mV Dropout at 1A Load Current and 3.6V Supply
      • Excellent DC and AC Performance
        • 1% Regulation over Line, Load, and Temperature
        • 4µVRMS of Output Noise, 10Hz to 100kHz
        • 75dB PSRR at 10kHz
      • High-Level System Integration
        • Integrated Pass-Through Function
        • Fast Active Discharge of 6Ω at OUT
        • Dynamic Two-Level Voltage Scaling with 33 Levels for Each Option for Flexible Configuration
        • Stable with 4µF (Minimum Capacitance)
        • Overcurrent and Overtemperature Protection
        • Power-OK/Power-on-Reset Output
      • Operation Temperature Range from -40°C to +125°C
      • Package
        • 12-Bump, 0.4mm-Pitch WLP
        • 14-Pin, 3mm x 3mm TDFN

      MAX25207 Versatile Automotive 60V/70V 2.2MHz Buck Controller with 7µA IQ and Optional Bypass Mode

      The MAX25206/MAX25207/MAX25208 are automotive 2.2MHz synchronous step-down controller IC with 7µ...
      • Meets Stringent OEM Module Power Consumption and Performance Specifications
        • 7µA Quiescent Current in Skip Mode at VOUT = 3.3V
        • ±1.5% Output-Voltage Accuracy: 5.0V/3.3V Fixed, or Adjustable Between 1V and 10V
      • Enables Crank-Ready Designs
        • Wide Input Supply Range from 3.5V to 42V
      • EMI Reduction Features Reduce Interference with Sensitive Radio Bands without Sacrificing Wide Input Voltage Range
        • 50ns (typ) Minimum On-Time Guarantees Skip-Free Operation for 3.3V Output from Car Battery at 2.2MHz
        • Spread-Spectrum Option
        • Frequency-Synchronization Input
        • Resistor-Programmable Frequency Between 220kHz and 2.2MHz
      • Integration and Thermally Enhanced Packages Save Board Space and Cost
        • 2.2MHz Step-Down Controller
        • 180° Out-of-Phase SYNCOUT Output for Synchronization
        • Current-Mode Controller with Forced-Continuous and Skip Modes
        • Thermally Enhanced 20-Pin Side-Wettable (SW) TQFN-EP Package
      • Protection Features Improve System Reliability
        • Supply Undervoltage Lockout
        • Overtemperature and Short-Circuit Protection
        • Output Overvoltage and Undervoltage Monitoring
        • -40°C to +125°C Grade 1 Automotive Temperature Range
      MAX17300 1-Cell ModelGauge m5 EZ Fuel Gauge with Protector and SHA-256 Authentication

      MAX17300 1-Cell ModelGauge m5 EZ Fuel Gauge with Protector and SHA-256 Authentication

      The MAX17300–MAX17303/MAX17310–MAX17313 is a 24μA IQ stand-alone pack-side fuel gauge IC with pr...
      • Battery Health + Programmable Safety/Protection
        • Overvoltage (Temperature Dependent)
        • Overcharge Current 
        • Over/Undertemperature
        • Battery Internal Self-Discharge Detection (MAX17300/10 Only)
        • Ideal Diode Discharge During Charge Fault
        • Charging Prescriptions (JEITA)
        • Zero-Volt Charging Option
        • Undervoltage + SmartEmpty
        • Overdischarge/Short-Circuit 
      • Nonvolatile Memory for Stand-Alone Operation
        • ​History Logging, User Data (122 Bytes)
      • Low Quiescent Current
        • FETs Enabled: 24µA Active, 18µA Hibernate
        • FETs Disabled: 5µA Ship, 0.5µA/0.02µA DeepShip
      • Parallel Battery Management (MAX17300/10 Only)
      • Pushbutton Wakeup—Eliminates System Consumption Until Button Press
      • ModelGauge m5 EZ Algorithm
        • Percent, Capacity,Time-to-Empty/Full, Age
        • Cycle+™ Age Forecast
      • Dynamic Power—Estimates Power Capability
      • Precision Measurement Without Calibration
        • ​Current, Voltage, Power, Time, Cycles
        • Die Temperature​/Thermistor

      MAX22202 36V, 3.5A Brushed Motor Driver with Integrated Current Sense

      The MAX22201/MAX22202/MAX22207 integrate one 36V, 3.5A peak full bridge capable of driving one b...
        One Full H-Bridge with +36V Voltage Rating
      • Total RDS(ON) (High Side + Low Side): 300mΩ (typ) (TA = +25°C)
      • Current Ratings (+25°C typ)
      • IPEAK = 3.5A
      • IRMS = 2A
      • Configurable Current Drive Regulation (CDR) for Limiting Stall and Inrush Current
      • Configurable Off Time (tOFF) for CDR (MAX22201 only)
      • Lossless Integrated Current Sensing (ICS) Eliminates External Bulky Resistors and Saves Power
      • Current Sense Output (CSO) Function: A Replica of the Internally Sensed Current is Output on the ISEN Pin
      • Current Drive Regulation Monitor (CDROUT) (MAX22207 only)
      • Fault Indicator pin (Active-Low FAULT)
      • Fully Integrated Charge Pump
      • Protections
      • Overcurrent Protection for Each Individual Channel (OCP)
      • Undervoltage Lockout (UVLO)
      • Thermal Shutdown (TSD) T = +165°C
      • ESD Protection 8kV HBM (OUT1 and OUT2 Pins)
      • Ultra-Small Package TDFN12 3mm x 3mm

      MAXQ1065 Ultra Low-Power Cryptographic Controller with ChipDNATM for Embedded Devices

      The MAXQ1065 is a security coprocessor that provides turnkey cryptographic functions for root-of...
      • ECC Compute Engine Using Curve NIST P-256
        • FIPS-186 ECDSA
        • NIST SP800-56Ar3 Key Exchange with Static Unified Model, C(0e, 2s, ECC CDH) with One-Step Key Derivation Using SHA-256
        • On-Board EC Key Generation with SP800-90B/A
      • SHA-2 Compute Engine
        • NIST FIPS-180-4 SHA2-256, HMAC-SHA-256
      • AES Compute Engine with 128 and 256 Key Sizes
        • ECB, CBC, CCM, GCM Cipher Modes
        • CBC-MAC, CMAC Message Authentication Codes
        • Onboard AES Key Generation with SP800-90A/B
      • True Random Number Generator (TRNG)
        • NIST SP800-90A/C Compliant
        • NIST SP800-90B Entropy Source
      • Secure Communication
        • TLS/DTLS 1.2 Handshake and Record Layer
          • ECDSA Authentication
          • ECDHE Key Exchange
          • AES-GCM or CCM Record Layer
        • SP800-56Ar3-Based Key Exchange
      • X.509 v3 Certificate Support
        • Storage of Root and Device Certificates
        • Onboard Verification of Chains of Certificates
        • ECDSA Verification on Supported Curves
      • High-Speed Interface for Host Microcontroller Communication
        • 10MHz SPI with Mode 0 or Mode 3 Operation
      • 8KB User Flash Array with ChipDNA PUF Encryption
      • Unique, Unalterable Factory-Programmed ID Number
      • Tamper Input Detects System-Level Intrusion
      • Secure Factory Provisioning Service
      • 12-Pin, 3mm x 3mm TDFN Package
      • -40°C to +105°C, 1.62V to 3.63V
      • Low-Power Operation: 100nA (typ) in Standby

      ChipDNA is a trademark of Maxim Integrated Products, Inc.
      DeepCover is a registered trademark of Maxim Integrated Products, Inc.




      MAX16984A Automotive High-Current Step-Down Converter with USB Protection/Host Charger Adapter Emulator

      The MAX16984A combines a 5V automotive-grade step-down converter capable of driving up to 3.0A, ...
      • Integrated DC-DC and USB Host Charge Emulator Enables 1-Chip Solution Directly from Car Battery to Portable Device
        • 4.5V to 28V (42V Load Dump) Operating Voltage
        • 5V, 3.0A Output Current Capability
        • Low-Q Current Skip and Shutdown Modes
        • Soft-Start Reduces Inrush Current
      • Low-Noise Features Prevent Interference with AM Band and Portable Devices
        • Fixed-Frequency 220kHz to 2.2MHz Operation
        • Forced-PWM Option at No Load
        • Spread Spectrum for EMI Reduction
        • SYNC Input for Frequency Parking
      • Optimal USB Power and Communication for Portable Devices
        • User-Adjustable Voltage Gain Adjusts Output Between 5V and 6.15V for Cable Compensation
        • ±3% Accuracy User-Adjustable USB Current Limit
        • 4Ω USB 2.0 1GHz Data Switches
        • Integrated iPod/iPhone/iPad Charge-Detection Termination Resistors
        • Supports USB BC1.2 Charging Downstream Port(CDP) and Dedicated Charging Port (DCP) Modes
        • Supports Chinese Telecommunication Industry Standard YD/T 1591-2009
        • Compatible with USB On-the-Go Specification
        • High-Speed Pass-Through Mode
      • Robust Design Keeps Vehicle System and Portable Devices Safe in Automotive Environment
        • Short-to-Battery Protection on DC-DC Converter
        • Short-to-Battery Protection on USB Pins
        • ±25kV Air/±8kV Contact ISO 10605
        • ±15kV Air/±8kV Contact IEC 61000-4-2
        • ±15kV Air/±8kV Contact (330Ω, 330pF)
        • Fault-Indication Active-Low, Open-Drain Output
        • Reduced Inrush Current with Soft-Start
        • Overtemperature Protection
        • -40°C to +125°C Operating Temperature Range
        • 32-Pin, 5mm x 5mm, TQFN Package

      MAX77643 Ultra Configurable PMIC Featuring 93% Peak Efficiency Single-Inductor, 3-Output Buck-Boost, 1-LDO for Long Battery Life

      The MAX77642/MAX77643 provide power supply solutions for low-power applications where size and e...
      • Highly Integrated
        • 3x Output, Single-Inductor Multiple-Output (SIMO) Buck-Boost Regulator
          • Supports Wide Output Voltage Range from 0.5V to 5.5V for all SIMO Channels
        • 1x 150mA LDO
          • 100mA in LSW mode
        • 2x GPIOs (MAX77643)
        • Watchdog Timer (MAX77643)
      • Ultra Low-Power SIMO​
        • 5μA Operating Current (3x SIMO Channels + 1x LDOs)
        • 1μA Operating Current per SIMO Channel
        • 0.3μA Shutdown Current
        • 93% Peak Efficiency in Boost-Only Mode
        • 91% Peak Efficiency in Buck-Only Mode
        • Less Than 20mVpp Output Ripple at VOUT = 1.8V
        • Automatic Low-Power Mode to Normal-Power Mode Transition
      • Flexible and Configurable
        • Ultra-Configurable Resistor Programmable Output Voltages (MAX77642)
        • I2C-Programmable Output Voltages (MAX77643)
      • Small Size
        • 4.24mm2 Wafer-Level Package (WLP)
        • 25-Bump, 0.4mm Pitch, 5 x 5 Array

      MAX32650FTHR Evaluation Kit for the MAX32650

      The MAX32650FTHR EV kit provides a platform for evaluating the capabilities of the MAX32650 ultr...
      • MAX32650 Arm® Cortex®-M4 processor with FPU
        • 120MHz Core Speed
        • 3MB Internal Flash, 1MB Internal SRAM
        • 104µW/MHz Executing from Cache at 1.1V
        • 240Mbps SDHC/eMMC/SDIO/microSD Interface
        • Up to 105 GPIO
        • SmartDMA Provides Background Memory Transfers with Programmable Data Processing
      • Battery Connector and Charging Circuit
      • Micro-SD Card Interface
      • USB 2.0 Full-Speed Device Interface
      • MAX11261 6-Channel, 24-Bit, 16ksps, ADC
      • Adafruit® Feather Board Compatible

      Technical Documentation

      Technical Documentaion

      *Required

      Technical Documentaion

      Technical Documents

      Showing 10 of View Top 100 Results View All Results

      Part Number Title Document Type Date

      Support & Training

      Automotive "V" Flow Drives Products to Zero Defects

      /content/maximintegrated/en/applications/automotive/products/aec-q100-products/automotive-v-flow-drives-products-to-zero-defects

      Description

      Automotive "V" Flow Drives Products to Zero Defects

      Maxim's "V" (Vehicle) flow has the following distinctive attributes:

      • Full ISO/TS 16949:2002- and ISO 9001:2008-Certified Quality Management System
      • Full ISO 14001:2004-Certified Environmental Management System
      • AEC-Q100-Qualified Parts for Specified Temperature Grades
      • Statistical Process Controls to Cpk ≥ 1.67 on All Key Parameters
      • Statistical Test Methodologies*: SYA, SBL, PAT, IDDQ, JVT, and BIST
      • PPAP (Production Part Approval Process) Available
      • Restriction to a Maximum of Two Qualified Production Sites for Wafer, Assembly, and Test
      • Global Failure-Analysis Support Centers Improve Customer Support
      • Worldwide Field Quality Support—Europe, Asia, Japan, and North America
      • Limited Product Change Control System and Extended PCN Horizons

      *As applicable.

      Select Maxim's "V" products, like the MAX2141ETH/V+, to receive AEC-Q100-qualified automotive parts.

      Reference Designs & Products

      MAX17310 1-Cell ModelGauge m5 EZ Fuel Gauge with Protector and SHA-256 Authentication

      MAX17310 1-Cell ModelGauge m5 EZ Fuel Gauge with Protector and SHA-256 Authentication

      The MAX17300–MAX17303/MAX17310–MAX17313 is a 24μA IQ stand-alone pack-side fuel gauge IC with pr...
      • Battery Health + Programmable Safety/Protection
        • Overvoltage (Temperature Dependent)
        • Overcharge Current 
        • Over/Undertemperature
        • Battery Internal Self-Discharge Detection (MAX17300/10 Only)
        • Ideal Diode Discharge During Charge Fault
        • Charging Prescriptions (JEITA)
        • Zero-Volt Charging Option
        • Undervoltage + SmartEmpty
        • Overdischarge/Short-Circuit 
      • Nonvolatile Memory for Stand-Alone Operation
        • ​History Logging, User Data (122 Bytes)
      • Low Quiescent Current
        • FETs Enabled: 24µA Active, 18µA Hibernate
        • FETs Disabled: 5µA Ship, 0.5µA/0.02µA DeepShip
      • Parallel Battery Management (MAX17300/10 Only)
      • Pushbutton Wakeup—Eliminates System Consumption Until Button Press
      • ModelGauge m5 EZ Algorithm
        • Percent, Capacity,Time-to-Empty/Full, Age
        • Cycle+™ Age Forecast
      • Dynamic Power—Estimates Power Capability
      • Precision Measurement Without Calibration
        • ​Current, Voltage, Power, Time, Cycles
        • Die Temperature​/Thermistor

      MAX20411 Automotive High-Efficiency Single 16A/22A/ 30A/40A Step-Down Converter Family

      The MAX20411 is a family of high-efficiency, synchronous step-down converters that operate with ...
      • High-Efficiency DC-DC Converter
      • Up to 40A Peak Output Current:
        • MAX20411A: 16A
        • MAX20411B: 22A
        • MAX20411C: 30A
        • MAX20411D: 40A
      • Differential Remote Voltage Sensing
      • 3.0V to 5.5V Operating Supply Voltage
      • I²C Controlled Output Voltage:
        • 0.5V to 1.275V in 6.25mV Steps
      • Excellent Load Transient Performance
      • Advanced Programmable Compensation
        • MAXQ™ Power Architecture
        • Hybrid Load Line and Integrator Options
      • 2.1MHz or 1.05MHz Operation
      • As Low as ±0.75% Output Voltage Accuracy
      • RESET-bar Output
      • Current Mode, Forced PWM Operation
      • ASIL D Compliant:
        • Redundant Reference
        • BIST Diagnostics
        • PEC on I²C
        • Programmable OV/UV with ±1% Accuracy
      • Overtemperature and Short-Circuit Protection
      • 3.5mm x 5mm 21-Pin Side-Wettable FC2QFN
      • -40°C to +125°C Grade 1 Automotive Temperature Range

      MAX25206 Versatile Automotive 60V/70V 2.2MHz Buck Controller with 7µA IQ and Optional Bypass Mode

      The MAX25206/MAX25207/MAX25208 are automotive 2.2MHz synchronous step-down controller IC with 7µ...
      • Meets Stringent OEM Module Power Consumption and Performance Specifications
        • 7µA Quiescent Current in Skip Mode at VOUT = 3.3V
        • ±1.5% Output-Voltage Accuracy: 5.0V/3.3V Fixed, or Adjustable Between 1V and 10V
      • Enables Crank-Ready Designs
        • Wide Input Supply Range from 3.5V to 42V
      • EMI Reduction Features Reduce Interference with Sensitive Radio Bands without Sacrificing Wide Input Voltage Range
        • 50ns (typ) Minimum On-Time Guarantees Skip-Free Operation for 3.3V Output from Car Battery at 2.2MHz
        • Spread-Spectrum Option
        • Frequency-Synchronization Input
        • Resistor-Programmable Frequency Between 220kHz and 2.2MHz
      • Integration and Thermally Enhanced Packages Save Board Space and Cost
        • 2.2MHz Step-Down Controller
        • 180° Out-of-Phase SYNCOUT Output for Synchronization
        • Current-Mode Controller with Forced-Continuous and Skip Modes
        • Thermally Enhanced 20-Pin Side-Wettable (SW) TQFN-EP Package
      • Protection Features Improve System Reliability
        • Supply Undervoltage Lockout
        • Overtemperature and Short-Circuit Protection
        • Output Overvoltage and Undervoltage Monitoring
        • -40°C to +125°C Grade 1 Automotive Temperature Range

      MAX22207 36V, 3.5A Brushed Motor Driver with Integrated Current Sense

      The MAX22201/MAX22202/MAX22207 integrate one 36V, 3.5A peak full bridge capable of driving one b...
        One Full H-Bridge with +36V Voltage Rating
      • Total RDS(ON) (High Side + Low Side): 300mΩ (typ) (TA = +25°C)
      • Current Ratings (+25°C typ)
      • IPEAK = 3.5A
      • IRMS = 2A
      • Configurable Current Drive Regulation (CDR) for Limiting Stall and Inrush Current
      • Configurable Off Time (tOFF) for CDR (MAX22201 only)
      • Lossless Integrated Current Sensing (ICS) Eliminates External Bulky Resistors and Saves Power
      • Current Sense Output (CSO) Function: A Replica of the Internally Sensed Current is Output on the ISEN Pin
      • Current Drive Regulation Monitor (CDROUT) (MAX22207 only)
      • Fault Indicator pin (Active-Low FAULT)
      • Fully Integrated Charge Pump
      • Protections
      • Overcurrent Protection for Each Individual Channel (OCP)
      • Undervoltage Lockout (UVLO)
      • Thermal Shutdown (TSD) T = +165°C
      • ESD Protection 8kV HBM (OUT1 and OUT2 Pins)
      • Ultra-Small Package TDFN12 3mm x 3mm

      MAX20057 36V Boost Controller with Two Synchronous Buck Converters (3.5A/2A) for Automotive Applications

      The MAX20057 is an automotive highly integrated triple-output PMIC. It includes two synchronous ...
      • Meets Stringent OEM Module Power Consumption and Performance Specifications
        • 10µA Supply Current with 5V Buck On
        • 8µA Supply Current with 3.3V Buck On
        • 30µA Supply Current with All Regulators On
      • Enables Crank-Ready Designs
        • Output Voltages in Regulation Through Cold CrankDown to 2V Battery Voltage
        • Wide Input-Supply Range from 3.5V to 36V
        • EMI Reduction Features Reduce Interference with Sensitive Radio Bands without Sacrificing Wide Input-Voltage Range
        • 20ns (typ) Minimum On-Time Guarantees Skip-Free Operation for 3.3V Output at 2.1MHz
        • Spread-Spectrum Option
        • Phase-Locked Loop (PLL) Frequency Synchronization
      • Integration and Thermally Enhanced Packages Save Board Space and Cost
        • Two 2.1MHz Buck Converters with Asynchronous Boost Controller
        • Current-Mode Controller with Forced Fixed-Frequency and Skip Modes
        • Thermally Enhanced 5mm x 5mm, 28-Pin TQFN-EP Package
      • Protection Features Improve System Reliability
        • Supply Undervoltage Lockout
        • Overtemperature and Short-Circuit Protection

      MAX16162 nanoPower Supply Supervisors with Glitch-Free Power-Up

      The MAX16161/MAX16162 are ultra-low current, singlechannel supervisory ICs. The devices monitor ...
      • No Powerup Glitch: (See Reliable Supervisor for Low-Voltage Processor Cores)
      • 825nA (typ) Quiescent Current Extends Battery Life
      • Positive and Negative Level-Triggered MR Input Options (MAX16161)
      • MR Debounce Circuitry (MAX16161)
      • Separate VCC and VIN Inputs (MAX16162)
      • Multiple Available Reset Timeout Periods
      • Threshold Voltage Options
      • 1.7V to 4.85V (MAX16161)
      • 0.6V to 4.85V (MAX16162)
      • 4-Bump WLP and 4-Pin SOT23 Packages
      • -40°C to +125°C Operating Temperature Range

      MAX33042E +5V, 4Mbps CAN Transceiver with ±40V Fault Protection, ±25V CMR, and ±40kV ESD in SOT23/8

      The MAX33042E is a +5V CAN transceiver with integrated protection for industrial applications. T...
    • Integrated Protection Increases Robustness
      • Increased Protection on CANH and CANL
        • ±40V Fault Tolerant
        • ±40kV ESD HBM Protection
        • ±12kV Contact and ±15kV Air-Gap ESD (ISO 10605, IEC 61000-4-2) Protection
        • ±25V Extended Common-Mode Input Range (CMR)
        • Short-Circuit Protection
      • Transmitter-Dominant Timeout Prevents Lockup
      • Thermal Shutdown
    • Provides Flexible Design Options
      • Slow Slew Rate to Minimize EMI
      • Low-Current Standby Mode
      • Shutdown Pin to Save Power
    • Small Package Option to Save PCB Area
      • 8-Pin SOT23
    • High-Speed Operation of up to 4Mbps
    • Operating Temperature Range of -40°C to +125°C
    • MAX20429 Dual 6A High-Efficiency Low Voltage Buck Converter

      The MAX20429 is a high-efficiency dual switching regulator that delivers up to 6A (peak) load cu...
      • High-Feature Set in an Ultra-Small Footprint
        • High-Efficiency DC-DC Converter
        • Two Independent Outputs, up to 6A per Output
        • 3.0V to 5.5V Operating Supply Voltage
        • Resistor-Adjustable Output Voltage
        • Optional Factory-Preset Output Voltage
        • 2.1MHz/3.2MHz Options
        • Enable Input
        • Individual Active-Low RESET Outputs
        • Spread-Spectrum Option
        • Peak Current-Mode Architecture
        • 3mm x 3.5mm FCQFN
      • High-Precision
        • 108/92% OV/UV Monitor
        • ±3% OV/UV Accuracy
        • ±1% Output Voltage Accuracy
        • Excellent Load-Transient Performance
        • PWM and SKIP Mode Operation
        • MAXQTM Power Architecture
      • High Efficiency
        • Up to 96% Efficiency 5V to 3.3V
        • Up to 90% Efficiency 5V to 1V
      • -40°C to +125°C Operating Temperature Range
      • AEC-Q100 Qualified

      MAX20419 High-Efficiency, 3-Output, Low-Voltage DC-DC Converter

      The MAX20419 is a high-efficiency, 3-output, low-voltage DC-DC converter IC. OUT1 boosts the inp...
      • Multiple Functions for Small Size
        • Synchronous 750mA Boost Converter
        • Fixed at 5V Output
        • Dual Synchronous Buck Converters Up to 3.6A
          • Factory-Configurable from 0.8V to 3.8V in 25mV Steps
        • Programmable Windowed Watchdog
        • 3.0V to 5.5V Operating Supply Voltage
        • 2.2MHz Operation
        • Individual Active-Low RESET_ Outputs
        • High-Precision Performance
          • ±1.9% Output-Voltage Accuracy (OUT1) and
          • ±1.4% Output-Voltage Accuracy (OUT2, OUT3)
          • ±1.3% OV/UV Monitoring (OUT1–OUT3, PV)
        • Excellent Load-Transient Performance
      • Diagnostics and Redundant Circuits
        • ASIL-C Compliant
        • Redundant Reference
        • Fail Safe on Open Pins
        • Shorted Pin Detection Active Low-RESET1–RESET3
        • Input Overvoltage Detection
      • Robust for the Automotive Environment
        • Current Mode, Forced-PWM and Skip Operation
        • Overtemperature and Short-Circuit Protection
        • 24-Pin (4mm x 4mm) TQFN with Exposed Pad
        • -40 °C to +125 °C Automotive Temperature Range

      MAX16161 nanoPower Supply Supervisors with Glitch-Free Power-Up

      The MAX16161/MAX16162 are ultra-low current, singlechannel supervisory ICs. The devices monitor ...
      • No Powerup Glitch: (See Reliable Supervisor for Low-Voltage Processor Cores)
      • 825nA (typ) Quiescent Current Extends Battery Life
      • Positive and Negative Level-Triggered MR Input Options (MAX16161)
      • MR Debounce Circuitry (MAX16161)
      • Separate VCC and VIN Inputs (MAX16162)
      • Multiple Available Reset Timeout Periods
      • Threshold Voltage Options
      • 1.7V to 4.85V (MAX16161)
      • 0.6V to 4.85V (MAX16162)
      • 4-Bump WLP and 4-Pin SOT23 Packages
      • -40°C to +125°C Operating Temperature Range

      MAX33045E 20Mbps, Half-Duplex RS-485/RS-422 Transceivers with ±40kV ESD Protection

      The MAX33045E/MAX33046E is a half-duplex RS-485/422 transceiver that operates at either 3.3V or ...
      • Integrated Protection Increases Robustness
        • ±25V Fault-Protection Range on Driver Outputs/Receiver Inputs
        • High-ESD Protection
          • ±40kV HBM ESD per JEDEC JS-001
          • ±15kV Air-Gap ESD per IEC 61000-4-2
          • ±10kV Contact ESD per IEC 61000-4-2
        • Short-Circuit-Protected Outputs
        • True Fail-Safe Receiver Prevents False Transition on Receiver Input Short or Open Events
        • Hot-Swap Capability Eliminates False Transitions on Receiver Input Shorts or Open Events
      • High-Speed Data Rates up to 20Mbps
      • Enables up to 256 Nodes on the Bus
      • Wide -40°C to +125°C Operating Temperature Range

        MAX20812 Dual-Output 6A, 3Mhz, 2.7V to 16V, Step-Down Switching Regulator

        The MAX20812 is a dual-output, fully integrated, highly efficient, step-down DC-DC switching reg...
        • High Power Density with Low Component Count
          • Dual-Output or Dual-Phase Operation
          • Single-Supply Operation with Integrated LDO for Bias Generation
          • Optional 2.5V to 5.5V External Bias for Higher Efficiency
          • Compact 3.5mm x 4.6mm, 21-Pin, FC2QFN Package
          • Internal Compensation
        • Wide Operating Range
          • 2.7V to 16V Input Voltage Range
          • 0.5V to 5.8V Output Voltage Range
          • 500kHz to 3MHz Configurable Switching Frequency
          • -40°C to +125°C Junction Temperature Range
          • Three Pin-Strap Programming Pins to Select Different Configurations
          • Independent Enable and Power Good for Each Output
        • Optimized Performance and Efficiency
          • 92.5% Peak Efficiency with VDDH = 12V, VOUT = 1.8V, and fSW = 1MHz
          • Interleaved 180° Out-of-Phase Operation
          • Selectable AMS to Improve Load Transient
          • Selectable DCM to Improve Light Load Efficiency
          • Active Current Balancing for Dual-Phase Operation

        MAX38913 4µVRMS Ultra-Low-Noise 1A LDO with Two-Level Output-Voltage Selection

        The MAX38913 is a low-noise linear regulator that delivers up to 1A of load current with as low ...
        • Delivers Flexible Output Range
          • 1.8V to 5.5V Input Voltage Range
          • 0.6V to 5.0V Output Voltage Range
          • 1A Maximum Output Current
          • 28mV Dropout at 1A Load Current and 5.0V Supply
          • 33mV Dropout at 1A Load Current and 3.6V Supply
        • Excellent DC and AC Performance
          • 1% Regulation over Line, Load, and Temperature
          • 4µVRMS of Output Noise, 10Hz to 100kHz
          • 75dB PSRR at 10kHz
        • High-Level System Integration
          • Integrated Pass-Through Function
          • Fast Active Discharge of 6Ω at OUT
          • Dynamic Two-Level Voltage Scaling with 33 Levels for Each Option for Flexible Configuration
          • Stable with 4µF (Minimum Capacitance)
          • Overcurrent and Overtemperature Protection
          • Power-OK/Power-on-Reset Output
        • Operation Temperature Range from -40°C to +125°C
        • Package
          • 12-Bump, 0.4mm-Pitch WLP
          • 14-Pin, 3mm x 3mm TDFN

        MAX25207 Versatile Automotive 60V/70V 2.2MHz Buck Controller with 7µA IQ and Optional Bypass Mode

        The MAX25206/MAX25207/MAX25208 are automotive 2.2MHz synchronous step-down controller IC with 7µ...
        • Meets Stringent OEM Module Power Consumption and Performance Specifications
          • 7µA Quiescent Current in Skip Mode at VOUT = 3.3V
          • ±1.5% Output-Voltage Accuracy: 5.0V/3.3V Fixed, or Adjustable Between 1V and 10V
        • Enables Crank-Ready Designs
          • Wide Input Supply Range from 3.5V to 42V
        • EMI Reduction Features Reduce Interference with Sensitive Radio Bands without Sacrificing Wide Input Voltage Range
          • 50ns (typ) Minimum On-Time Guarantees Skip-Free Operation for 3.3V Output from Car Battery at 2.2MHz
          • Spread-Spectrum Option
          • Frequency-Synchronization Input
          • Resistor-Programmable Frequency Between 220kHz and 2.2MHz
        • Integration and Thermally Enhanced Packages Save Board Space and Cost
          • 2.2MHz Step-Down Controller
          • 180° Out-of-Phase SYNCOUT Output for Synchronization
          • Current-Mode Controller with Forced-Continuous and Skip Modes
          • Thermally Enhanced 20-Pin Side-Wettable (SW) TQFN-EP Package
        • Protection Features Improve System Reliability
          • Supply Undervoltage Lockout
          • Overtemperature and Short-Circuit Protection
          • Output Overvoltage and Undervoltage Monitoring
          • -40°C to +125°C Grade 1 Automotive Temperature Range
        MAX17300 1-Cell ModelGauge m5 EZ Fuel Gauge with Protector and SHA-256 Authentication

        MAX17300 1-Cell ModelGauge m5 EZ Fuel Gauge with Protector and SHA-256 Authentication

        The MAX17300–MAX17303/MAX17310–MAX17313 is a 24μA IQ stand-alone pack-side fuel gauge IC with pr...
        • Battery Health + Programmable Safety/Protection
          • Overvoltage (Temperature Dependent)
          • Overcharge Current 
          • Over/Undertemperature
          • Battery Internal Self-Discharge Detection (MAX17300/10 Only)
          • Ideal Diode Discharge During Charge Fault
          • Charging Prescriptions (JEITA)
          • Zero-Volt Charging Option
          • Undervoltage + SmartEmpty
          • Overdischarge/Short-Circuit 
        • Nonvolatile Memory for Stand-Alone Operation
          • ​History Logging, User Data (122 Bytes)
        • Low Quiescent Current
          • FETs Enabled: 24µA Active, 18µA Hibernate
          • FETs Disabled: 5µA Ship, 0.5µA/0.02µA DeepShip
        • Parallel Battery Management (MAX17300/10 Only)
        • Pushbutton Wakeup—Eliminates System Consumption Until Button Press
        • ModelGauge m5 EZ Algorithm
          • Percent, Capacity,Time-to-Empty/Full, Age
          • Cycle+™ Age Forecast
        • Dynamic Power—Estimates Power Capability
        • Precision Measurement Without Calibration
          • ​Current, Voltage, Power, Time, Cycles
          • Die Temperature​/Thermistor

        MAX22202 36V, 3.5A Brushed Motor Driver with Integrated Current Sense

        The MAX22201/MAX22202/MAX22207 integrate one 36V, 3.5A peak full bridge capable of driving one b...
          One Full H-Bridge with +36V Voltage Rating
        • Total RDS(ON) (High Side + Low Side): 300mΩ (typ) (TA = +25°C)
        • Current Ratings (+25°C typ)
        • IPEAK = 3.5A
        • IRMS = 2A
        • Configurable Current Drive Regulation (CDR) for Limiting Stall and Inrush Current
        • Configurable Off Time (tOFF) for CDR (MAX22201 only)
        • Lossless Integrated Current Sensing (ICS) Eliminates External Bulky Resistors and Saves Power
        • Current Sense Output (CSO) Function: A Replica of the Internally Sensed Current is Output on the ISEN Pin
        • Current Drive Regulation Monitor (CDROUT) (MAX22207 only)
        • Fault Indicator pin (Active-Low FAULT)
        • Fully Integrated Charge Pump
        • Protections
        • Overcurrent Protection for Each Individual Channel (OCP)
        • Undervoltage Lockout (UVLO)
        • Thermal Shutdown (TSD) T = +165°C
        • ESD Protection 8kV HBM (OUT1 and OUT2 Pins)
        • Ultra-Small Package TDFN12 3mm x 3mm

        MAXQ1065 Ultra Low-Power Cryptographic Controller with ChipDNATM for Embedded Devices

        The MAXQ1065 is a security coprocessor that provides turnkey cryptographic functions for root-of...
        • ECC Compute Engine Using Curve NIST P-256
          • FIPS-186 ECDSA
          • NIST SP800-56Ar3 Key Exchange with Static Unified Model, C(0e, 2s, ECC CDH) with One-Step Key Derivation Using SHA-256
          • On-Board EC Key Generation with SP800-90B/A
        • SHA-2 Compute Engine
          • NIST FIPS-180-4 SHA2-256, HMAC-SHA-256
        • AES Compute Engine with 128 and 256 Key Sizes
          • ECB, CBC, CCM, GCM Cipher Modes
          • CBC-MAC, CMAC Message Authentication Codes
          • Onboard AES Key Generation with SP800-90A/B
        • True Random Number Generator (TRNG)
          • NIST SP800-90A/C Compliant
          • NIST SP800-90B Entropy Source
        • Secure Communication
          • TLS/DTLS 1.2 Handshake and Record Layer
            • ECDSA Authentication
            • ECDHE Key Exchange
            • AES-GCM or CCM Record Layer
          • SP800-56Ar3-Based Key Exchange
        • X.509 v3 Certificate Support
          • Storage of Root and Device Certificates
          • Onboard Verification of Chains of Certificates
          • ECDSA Verification on Supported Curves
        • High-Speed Interface for Host Microcontroller Communication
          • 10MHz SPI with Mode 0 or Mode 3 Operation
        • 8KB User Flash Array with ChipDNA PUF Encryption
        • Unique, Unalterable Factory-Programmed ID Number
        • Tamper Input Detects System-Level Intrusion
        • Secure Factory Provisioning Service
        • 12-Pin, 3mm x 3mm TDFN Package
        • -40°C to +105°C, 1.62V to 3.63V
        • Low-Power Operation: 100nA (typ) in Standby

        ChipDNA is a trademark of Maxim Integrated Products, Inc.
        DeepCover is a registered trademark of Maxim Integrated Products, Inc.




        MAX16984A Automotive High-Current Step-Down Converter with USB Protection/Host Charger Adapter Emulator

        The MAX16984A combines a 5V automotive-grade step-down converter capable of driving up to 3.0A, ...
        • Integrated DC-DC and USB Host Charge Emulator Enables 1-Chip Solution Directly from Car Battery to Portable Device
          • 4.5V to 28V (42V Load Dump) Operating Voltage
          • 5V, 3.0A Output Current Capability
          • Low-Q Current Skip and Shutdown Modes
          • Soft-Start Reduces Inrush Current
        • Low-Noise Features Prevent Interference with AM Band and Portable Devices
          • Fixed-Frequency 220kHz to 2.2MHz Operation
          • Forced-PWM Option at No Load
          • Spread Spectrum for EMI Reduction
          • SYNC Input for Frequency Parking
        • Optimal USB Power and Communication for Portable Devices
          • User-Adjustable Voltage Gain Adjusts Output Between 5V and 6.15V for Cable Compensation
          • ±3% Accuracy User-Adjustable USB Current Limit
          • 4Ω USB 2.0 1GHz Data Switches
          • Integrated iPod/iPhone/iPad Charge-Detection Termination Resistors
          • Supports USB BC1.2 Charging Downstream Port(CDP) and Dedicated Charging Port (DCP) Modes
          • Supports Chinese Telecommunication Industry Standard YD/T 1591-2009
          • Compatible with USB On-the-Go Specification
          • High-Speed Pass-Through Mode
        • Robust Design Keeps Vehicle System and Portable Devices Safe in Automotive Environment
          • Short-to-Battery Protection on DC-DC Converter
          • Short-to-Battery Protection on USB Pins
          • ±25kV Air/±8kV Contact ISO 10605
          • ±15kV Air/±8kV Contact IEC 61000-4-2
          • ±15kV Air/±8kV Contact (330Ω, 330pF)
          • Fault-Indication Active-Low, Open-Drain Output
          • Reduced Inrush Current with Soft-Start
          • Overtemperature Protection
          • -40°C to +125°C Operating Temperature Range
          • 32-Pin, 5mm x 5mm, TQFN Package

        MAX77643 Ultra Configurable PMIC Featuring 93% Peak Efficiency Single-Inductor, 3-Output Buck-Boost, 1-LDO for Long Battery Life

        The MAX77642/MAX77643 provide power supply solutions for low-power applications where size and e...
        • Highly Integrated
          • 3x Output, Single-Inductor Multiple-Output (SIMO) Buck-Boost Regulator
            • Supports Wide Output Voltage Range from 0.5V to 5.5V for all SIMO Channels
          • 1x 150mA LDO
            • 100mA in LSW mode
          • 2x GPIOs (MAX77643)
          • Watchdog Timer (MAX77643)
        • Ultra Low-Power SIMO​
          • 5μA Operating Current (3x SIMO Channels + 1x LDOs)
          • 1μA Operating Current per SIMO Channel
          • 0.3μA Shutdown Current
          • 93% Peak Efficiency in Boost-Only Mode
          • 91% Peak Efficiency in Buck-Only Mode
          • Less Than 20mVpp Output Ripple at VOUT = 1.8V
          • Automatic Low-Power Mode to Normal-Power Mode Transition
        • Flexible and Configurable
          • Ultra-Configurable Resistor Programmable Output Voltages (MAX77642)
          • I2C-Programmable Output Voltages (MAX77643)
        • Small Size
          • 4.24mm2 Wafer-Level Package (WLP)
          • 25-Bump, 0.4mm Pitch, 5 x 5 Array

        MAX32650FTHR Evaluation Kit for the MAX32650

        The MAX32650FTHR EV kit provides a platform for evaluating the capabilities of the MAX32650 ultr...
        • MAX32650 Arm® Cortex®-M4 processor with FPU
          • 120MHz Core Speed
          • 3MB Internal Flash, 1MB Internal SRAM
          • 104µW/MHz Executing from Cache at 1.1V
          • 240Mbps SDHC/eMMC/SDIO/microSD Interface
          • Up to 105 GPIO
          • SmartDMA Provides Background Memory Transfers with Programmable Data Processing
        • Battery Connector and Charging Circuit
        • Micro-SD Card Interface
        • USB 2.0 Full-Speed Device Interface
        • MAX11261 6-Channel, 24-Bit, 16ksps, ADC
        • Adafruit® Feather Board Compatible

        Technical Documentation

        Technical Documentaion

        *Required

        Technical Documentaion

        Technical Documents

        Showing 10 of View Top 100 Results View All Results

        Part Number Title Document Type Date

        Support & Training

        Automotive "V" Flow Drives Products to Zero Defects