Top
/content/maximintegrated/en/products/interface/high-speed-signaling 
Maxim offers a wide variety of ICs for high-speed differential signaling. Our products support a dozen standards: CML, CMOS, ECL, HSTL, LCDS, LVCMOS, LVDS, LVECL, LVPECL, LVTTL, PECL, and TTL.
Technical Documentation
Featured Products
MAX96700COAXEVKIT Evaluation Kit for the MAX96700 with Coax or STP Cable
The MAX96700 evaluation kit (EV kit) provides a proven design to evaluate the MAX96700 high-band...
- Accepts GMSL Serial Data through FAKRA Connectors as Inputs and Outputs 16-Bit Parallel Output Data
- Power Over Coax (POC) Capable
- Windows Vista- and Windows 7-Compatible Software
- USB-Controlled Interface (Cable Included)
- Proven PCB Layout
- Fully Assembled and Tested
MAX96700 14-Bit GMSL Deserializer with Coax or STP Cable Input
The MAX96700 is a compact deserializer especially suited for automotive camera applications. Fea...
- Ideal for Safety Camera Applications
- Works with Low-Cost 50Ω Coax (100Ω STP) Cables
- Error Detection of Video/Control Data
- High-Immunity Mode for Robust Control-Channel EMC Tolerance
- Retransmission of Control Data Upon Error
- Best-in-Class Supply Current: 190mA (max)
- Adaptive Equalization for 15m Cable at Full Speed
- 32-Pin (5mm × 5mm) TQFN Package
- Horizontal- and Vertical-Sync Encoding and Tracking
- High-Speed Deserialization for Megapixel Cameras
- Up to 1.74Gbps Serial-Bit Rate
- 6.25MHz to 87MHz ×12-Bit + H/V Data
- 36.66MHz to 116MHz ×12-Bit + H/V Data (through Internal Encoding)
- Multiple Modes for System Flexibility
- 9.6kbps to 1Mbps Control Channel in UART, I2C (with Clock Stretch), or UART-to-I2C Modes
- 2:1 Input Mux for Camera Selection
- 15 Hardware-Selectable I2C-Device Addresses
- Pairs with Any Maxim GMSL Serializer
- Crosspoint Switch Maps Data to any Output
- Reduces EMI and Shielding Requirements
- Spread-Spectrum Serial-Input Tracking and Transfer to the Parallel Output
- 1.7V to 1.9V Core and 1.7V to 3.6V I/O Supply
- Peripheral Features for System Verification
- Built-In PRBS Receiver for BER Testing
- Eye-Width Monitor Allows In-System Test of High-Speed Serial Link
- Dedicated “Up/Down” GPI for Camera Frame Sync Trigger and Other Uses
- Meets AEC-Q100 Automotive Specification
- -40°C to +115°C Operating Temperature Range
- ±8kV Contact and ±15kV Air IEC 61000-4-2 and ISO 10605 ESD Protection
MAX96701COAXEVKIT Evaluation Kit for the MAX96701 with Coax or STP Cable
The MAX96701 coax evaluation kit (EV kit) provides a proven design to evaluate the MAX96701 high...
- Accepts 14-Bit Parallel Input Data and Outputs GMSL Serial Data through FAKRA Connectors
- Power-over-Coax Capable
- Windows Vista- and Windows 7-Compatible Software
- USB-Controlled Interface (Cable Included)
- USB Powered
- Proven PCB Layout
- Fully Assembled and Tested
MAX96701 14-Bit GMSL Serializer with High-Immunity/Bandwidth Mode and Coax/STP Cable Drive
The MAX96701 is a compact serializer in a 4mm x 4mm TQFN package especially suited for automotiv...
- Ideal for Safety Camera Applications
- Works with Low-Cost 50Ω Coax (100Ω STP) Cables
- Error Detection of Video/Control Data
- High-Immunity Mode for Robust Control-Channel EMC Tolerance
- Retransmission of Control Data Upon Error Detection
- Best-in-Class Supply Current: 88mA (max)
- Pre/Deemphasis Allows 15m Cable at Full Speed
- 24-Pin (4mm × 4mm) TQFN Package with 0.5mm Lead Pitch
- High-Speed Data Serialization for Megapixel Cameras
- Up to 1.74Gbps Serial-Bit Rate
- 12.5MHz to 87MHz × 14 Bit + H/V Data
- Multiple Modes for System Flexibility
- 9.6kbps to 1Mbps Control Channel in I2C Mode (with Clock Stretch)
- Crosspoint Switch Accepts Any Input Bitmap
- Modes for Encoded VSYNC and HSYNC
- Reduces EMI and Shielding Requirements
- Programmable Output Spread Spectrum
- Tracks Spread Spectrum Applied at the Parallel Input
- 1.7V to 1.9V I/O Supply
- Peripheral Features for Camera Power-Up and Verification
- Built-In PRBS Generator for BER Testing
- Dedicated GPO for Camera Frame-Sync Trigger and Other Uses
- Remote/Local Wake-Up from Sleep Mode
- Meets AEC-Q100 Automotive Specification
- -40°C to +115°C Operating Temperature
- >±8kV Contact and >±15kV Air IEC 61000-4-2 and ISO 10605 ESD Protection
MAX9280A 3.12Gbps GMSL Deserializers for Coax or STP Input and Parallel Output
The MAX9276A/MAX9280A gigabit multimedia serial link (GMSL) deserializers receive data from a GM...
- Ideal for High-Definition Video Applications
- Works with Low-Cost 50Ω Coax Cable and FAKRA Connectors or 100Ω STP
- 104MHz High-Bandwidth Mode Supports 1920×720p/60Hz Display With 24-Bit Color
- Equalization Allows 15m Cable at Full Speed
- Up to 192kHz Sample Rate And 32-Bit Sample Depth For 7.1 Channel HD Audio
- Audio Clock from Audio Source or Audio Sink
- Color Lookup Table for Gamma Correction
- CNTL[3:0] Control Outputs
- Multiple Data Rates for System Flexibility
- Up to 3.12Gbps Serial-Bit Rate
- 6.25MHz to 104MHz Pixel Clock
- 9.6kbps to 1Mbps Control Channel in UART, Mixed UART/I2C, or I2C Mode with Clock-Stretch Capability
- Reduces EMI and Shielding Requirements
- Programmable Spread Spectrum Reduces EMI
- Tracks Spread Spectrum on Input
- High-Immunity Mode for Maximum Control-Channel Noise Rejection
- Peripheral Features for System Power-Up and Verification
- Built-In PRBS Tester for BER Testing of the Serial Link
- Programmable Choice of 8 Default Device Addresses
- Two Dedicated GPIO Ports
- Dedicated “Up/Down” GPI for Touch-Screen Interrupt and Other Uses
- Remote/Local Wake-Up from Sleep Mode
- Meets Rigorous Automotive and Industrial Requirements
- -40°C to +105°C Operating Temperature
- ±8kV Contact and ±15kV Air ISO 10605 and IEC 61000-4-2 ESD Protection
MAX9276A 3.12Gbps GMSL Deserializers for Coax or STP Input and Parallel Output
The MAX9276A/MAX9280A gigabit multimedia serial link (GMSL) deserializers receive data from a GM...
- Ideal for High-Definition Video Applications
- Works with Low-Cost 50Ω Coax Cable and FAKRA Connectors or 100Ω STP
- 104MHz High-Bandwidth Mode Supports 1920×720p/60Hz Display With 24-Bit Color
- Equalization Allows 15m Cable at Full Speed
- Up to 192kHz Sample Rate And 32-Bit Sample Depth For 7.1 Channel HD Audio
- Audio Clock from Audio Source or Audio Sink
- Color Lookup Table for Gamma Correction
- CNTL[3:0] Control Outputs
- Multiple Data Rates for System Flexibility
- Up to 3.12Gbps Serial-Bit Rate
- 6.25MHz to 104MHz Pixel Clock
- 9.6kbps to 1Mbps Control Channel in UART, Mixed UART/I2C, or I2C Mode with Clock-Stretch Capability
- Reduces EMI and Shielding Requirements
- Programmable Spread Spectrum Reduces EMI
- Tracks Spread Spectrum on Input
- High-Immunity Mode for Maximum Control-Channel Noise Rejection
- Peripheral Features for System Power-Up and Verification
- Built-In PRBS Tester for BER Testing of the Serial Link
- Programmable Choice of 8 Default Device Addresses
- Two Dedicated GPIO Ports
- Dedicated “Up/Down” GPI for Touch-Screen Interrupt and Other Uses
- Remote/Local Wake-Up from Sleep Mode
- Meets Rigorous Automotive and Industrial Requirements
- -40°C to +105°C Operating Temperature
- ±8kV Contact and ±15kV Air ISO 10605 and IEC 61000-4-2 ESD Protection
MAX9113 Single/Dual LVDS Line Receivers with Ultra-Low Pulse Skew in SOT23
The MAX9111/MAX9113 single/dual low-voltage differential signaling (LVDS) receivers are designed...
- Low 300ps (max) Pulse Skew for High-Resolution Imaging and High-Speed Interconnect
- Space-Saving 8-Pin SOT23 and SO Packages
- Pin-Compatible Upgrades to DS90LV018A and DS90LV028A (SO Packages Only)
- Guaranteed 500Mbps Data Rate
- Low 29mW Power Dissipation at 3.3V
- Conform to EIA/TIA-644 Standard
- Single +3.3V Supply
- Flow-Through Pinout Simplifies PCB Layout
- Fail-Safe Circuit Sets Output High for Undriven Inputs
- High-Impedance LVDS Inputs when Powered Off
- AEC-Q100 Qualified, Refer to Ordering Information for the Specific /V Versions
MAX9111 Single/Dual LVDS Line Receivers with Ultra-Low Pulse Skew in SOT23
The MAX9111/MAX9113 single/dual low-voltage differential signaling (LVDS) receivers are designed...
- Low 300ps (max) Pulse Skew for High-Resolution Imaging and High-Speed Interconnect
- Space-Saving 8-Pin SOT23 and SO Packages
- Pin-Compatible Upgrades to DS90LV018A and DS90LV028A (SO Packages Only)
- Guaranteed 500Mbps Data Rate
- Low 29mW Power Dissipation at 3.3V
- Conform to EIA/TIA-644 Standard
- Single +3.3V Supply
- Flow-Through Pinout Simplifies PCB Layout
- Fail-Safe Circuit Sets Output High for Undriven Inputs
- High-Impedance LVDS Inputs when Powered Off
- AEC-Q100 Qualified, Refer to Ordering Information for the Specific /V Versions
MAX9110 Single/Dual LVDS Line Driver with Ultra-Low Differential Skew in SOT23
The MAX9110/MAX9112 single/dual low-voltage differential signaling (LVDS) transmitters are desig...
- Low 250ps (max) Pulse Skew for High-Resolution Imaging and High-Speed Interconnect
- Space-Saving 8-Pin SOT23 and SO Packages
- Pin-Compatible Upgrades to DS90LV017/017A and DS90LV027/027A (SO Packages)
- Guaranteed 500Mbps Data Rate
- Low 22mW Power Dissipation at 3.3V (31mW for MAX9112)
- Conform to EIA/TIA-644 Standard
- Single +3.3V Supply
- Flow-Through Pinout Simplifies PC Board Layout
- Driver Outputs High Impedance when Powered Off
MAX9112 Single/Dual LVDS Line Driver with Ultra-Low Differential Skew in SOT23
The MAX9110/MAX9112 single/dual low-voltage differential signaling (LVDS) transmitters are desig...
- Low 250ps (max) Pulse Skew for High-Resolution Imaging and High-Speed Interconnect
- Space-Saving 8-Pin SOT23 and SO Packages
- Pin-Compatible Upgrades to DS90LV017/017A and DS90LV027/027A (SO Packages)
- Guaranteed 500Mbps Data Rate
- Low 22mW Power Dissipation at 3.3V (31mW for MAX9112)
- Conform to EIA/TIA-644 Standard
- Single +3.3V Supply
- Flow-Through Pinout Simplifies PC Board Layout
- Driver Outputs High Impedance when Powered Off
MAX96700COAXEVKIT Evaluation Kit for the MAX96700 with Coax or STP Cable
The MAX96700 evaluation kit (EV kit) provides a proven design to evaluate the MAX96700 high-band...
- Accepts GMSL Serial Data through FAKRA Connectors as Inputs and Outputs 16-Bit Parallel Output Data
- Power Over Coax (POC) Capable
- Windows Vista- and Windows 7-Compatible Software
- USB-Controlled Interface (Cable Included)
- Proven PCB Layout
- Fully Assembled and Tested
MAX96700 14-Bit GMSL Deserializer with Coax or STP Cable Input
The MAX96700 is a compact deserializer especially suited for automotive camera applications. Fea...
- Ideal for Safety Camera Applications
- Works with Low-Cost 50Ω Coax (100Ω STP) Cables
- Error Detection of Video/Control Data
- High-Immunity Mode for Robust Control-Channel EMC Tolerance
- Retransmission of Control Data Upon Error
- Best-in-Class Supply Current: 190mA (max)
- Adaptive Equalization for 15m Cable at Full Speed
- 32-Pin (5mm × 5mm) TQFN Package
- Horizontal- and Vertical-Sync Encoding and Tracking
- High-Speed Deserialization for Megapixel Cameras
- Up to 1.74Gbps Serial-Bit Rate
- 6.25MHz to 87MHz ×12-Bit + H/V Data
- 36.66MHz to 116MHz ×12-Bit + H/V Data (through Internal Encoding)
- Multiple Modes for System Flexibility
- 9.6kbps to 1Mbps Control Channel in UART, I2C (with Clock Stretch), or UART-to-I2C Modes
- 2:1 Input Mux for Camera Selection
- 15 Hardware-Selectable I2C-Device Addresses
- Pairs with Any Maxim GMSL Serializer
- Crosspoint Switch Maps Data to any Output
- Reduces EMI and Shielding Requirements
- Spread-Spectrum Serial-Input Tracking and Transfer to the Parallel Output
- 1.7V to 1.9V Core and 1.7V to 3.6V I/O Supply
- Peripheral Features for System Verification
- Built-In PRBS Receiver for BER Testing
- Eye-Width Monitor Allows In-System Test of High-Speed Serial Link
- Dedicated “Up/Down” GPI for Camera Frame Sync Trigger and Other Uses
- Meets AEC-Q100 Automotive Specification
- -40°C to +115°C Operating Temperature Range
- ±8kV Contact and ±15kV Air IEC 61000-4-2 and ISO 10605 ESD Protection
MAX96701COAXEVKIT Evaluation Kit for the MAX96701 with Coax or STP Cable
The MAX96701 coax evaluation kit (EV kit) provides a proven design to evaluate the MAX96701 high...
- Accepts 14-Bit Parallel Input Data and Outputs GMSL Serial Data through FAKRA Connectors
- Power-over-Coax Capable
- Windows Vista- and Windows 7-Compatible Software
- USB-Controlled Interface (Cable Included)
- USB Powered
- Proven PCB Layout
- Fully Assembled and Tested
MAX96701 14-Bit GMSL Serializer with High-Immunity/Bandwidth Mode and Coax/STP Cable Drive
The MAX96701 is a compact serializer in a 4mm x 4mm TQFN package especially suited for automotiv...
- Ideal for Safety Camera Applications
- Works with Low-Cost 50Ω Coax (100Ω STP) Cables
- Error Detection of Video/Control Data
- High-Immunity Mode for Robust Control-Channel EMC Tolerance
- Retransmission of Control Data Upon Error Detection
- Best-in-Class Supply Current: 88mA (max)
- Pre/Deemphasis Allows 15m Cable at Full Speed
- 24-Pin (4mm × 4mm) TQFN Package with 0.5mm Lead Pitch
- High-Speed Data Serialization for Megapixel Cameras
- Up to 1.74Gbps Serial-Bit Rate
- 12.5MHz to 87MHz × 14 Bit + H/V Data
- Multiple Modes for System Flexibility
- 9.6kbps to 1Mbps Control Channel in I2C Mode (with Clock Stretch)
- Crosspoint Switch Accepts Any Input Bitmap
- Modes for Encoded VSYNC and HSYNC
- Reduces EMI and Shielding Requirements
- Programmable Output Spread Spectrum
- Tracks Spread Spectrum Applied at the Parallel Input
- 1.7V to 1.9V I/O Supply
- Peripheral Features for Camera Power-Up and Verification
- Built-In PRBS Generator for BER Testing
- Dedicated GPO for Camera Frame-Sync Trigger and Other Uses
- Remote/Local Wake-Up from Sleep Mode
- Meets AEC-Q100 Automotive Specification
- -40°C to +115°C Operating Temperature
- >±8kV Contact and >±15kV Air IEC 61000-4-2 and ISO 10605 ESD Protection
MAX9280A 3.12Gbps GMSL Deserializers for Coax or STP Input and Parallel Output
The MAX9276A/MAX9280A gigabit multimedia serial link (GMSL) deserializers receive data from a GM...
- Ideal for High-Definition Video Applications
- Works with Low-Cost 50Ω Coax Cable and FAKRA Connectors or 100Ω STP
- 104MHz High-Bandwidth Mode Supports 1920×720p/60Hz Display With 24-Bit Color
- Equalization Allows 15m Cable at Full Speed
- Up to 192kHz Sample Rate And 32-Bit Sample Depth For 7.1 Channel HD Audio
- Audio Clock from Audio Source or Audio Sink
- Color Lookup Table for Gamma Correction
- CNTL[3:0] Control Outputs
- Multiple Data Rates for System Flexibility
- Up to 3.12Gbps Serial-Bit Rate
- 6.25MHz to 104MHz Pixel Clock
- 9.6kbps to 1Mbps Control Channel in UART, Mixed UART/I2C, or I2C Mode with Clock-Stretch Capability
- Reduces EMI and Shielding Requirements
- Programmable Spread Spectrum Reduces EMI
- Tracks Spread Spectrum on Input
- High-Immunity Mode for Maximum Control-Channel Noise Rejection
- Peripheral Features for System Power-Up and Verification
- Built-In PRBS Tester for BER Testing of the Serial Link
- Programmable Choice of 8 Default Device Addresses
- Two Dedicated GPIO Ports
- Dedicated “Up/Down” GPI for Touch-Screen Interrupt and Other Uses
- Remote/Local Wake-Up from Sleep Mode
- Meets Rigorous Automotive and Industrial Requirements
- -40°C to +105°C Operating Temperature
- ±8kV Contact and ±15kV Air ISO 10605 and IEC 61000-4-2 ESD Protection
MAX9276A 3.12Gbps GMSL Deserializers for Coax or STP Input and Parallel Output
The MAX9276A/MAX9280A gigabit multimedia serial link (GMSL) deserializers receive data from a GM...
- Ideal for High-Definition Video Applications
- Works with Low-Cost 50Ω Coax Cable and FAKRA Connectors or 100Ω STP
- 104MHz High-Bandwidth Mode Supports 1920×720p/60Hz Display With 24-Bit Color
- Equalization Allows 15m Cable at Full Speed
- Up to 192kHz Sample Rate And 32-Bit Sample Depth For 7.1 Channel HD Audio
- Audio Clock from Audio Source or Audio Sink
- Color Lookup Table for Gamma Correction
- CNTL[3:0] Control Outputs
- Multiple Data Rates for System Flexibility
- Up to 3.12Gbps Serial-Bit Rate
- 6.25MHz to 104MHz Pixel Clock
- 9.6kbps to 1Mbps Control Channel in UART, Mixed UART/I2C, or I2C Mode with Clock-Stretch Capability
- Reduces EMI and Shielding Requirements
- Programmable Spread Spectrum Reduces EMI
- Tracks Spread Spectrum on Input
- High-Immunity Mode for Maximum Control-Channel Noise Rejection
- Peripheral Features for System Power-Up and Verification
- Built-In PRBS Tester for BER Testing of the Serial Link
- Programmable Choice of 8 Default Device Addresses
- Two Dedicated GPIO Ports
- Dedicated “Up/Down” GPI for Touch-Screen Interrupt and Other Uses
- Remote/Local Wake-Up from Sleep Mode
- Meets Rigorous Automotive and Industrial Requirements
- -40°C to +105°C Operating Temperature
- ±8kV Contact and ±15kV Air ISO 10605 and IEC 61000-4-2 ESD Protection
MAX9113 Single/Dual LVDS Line Receivers with Ultra-Low Pulse Skew in SOT23
The MAX9111/MAX9113 single/dual low-voltage differential signaling (LVDS) receivers are designed...
- Low 300ps (max) Pulse Skew for High-Resolution Imaging and High-Speed Interconnect
- Space-Saving 8-Pin SOT23 and SO Packages
- Pin-Compatible Upgrades to DS90LV018A and DS90LV028A (SO Packages Only)
- Guaranteed 500Mbps Data Rate
- Low 29mW Power Dissipation at 3.3V
- Conform to EIA/TIA-644 Standard
- Single +3.3V Supply
- Flow-Through Pinout Simplifies PCB Layout
- Fail-Safe Circuit Sets Output High for Undriven Inputs
- High-Impedance LVDS Inputs when Powered Off
- AEC-Q100 Qualified, Refer to Ordering Information for the Specific /V Versions
MAX9111 Single/Dual LVDS Line Receivers with Ultra-Low Pulse Skew in SOT23
The MAX9111/MAX9113 single/dual low-voltage differential signaling (LVDS) receivers are designed...
- Low 300ps (max) Pulse Skew for High-Resolution Imaging and High-Speed Interconnect
- Space-Saving 8-Pin SOT23 and SO Packages
- Pin-Compatible Upgrades to DS90LV018A and DS90LV028A (SO Packages Only)
- Guaranteed 500Mbps Data Rate
- Low 29mW Power Dissipation at 3.3V
- Conform to EIA/TIA-644 Standard
- Single +3.3V Supply
- Flow-Through Pinout Simplifies PCB Layout
- Fail-Safe Circuit Sets Output High for Undriven Inputs
- High-Impedance LVDS Inputs when Powered Off
- AEC-Q100 Qualified, Refer to Ordering Information for the Specific /V Versions
MAX9110 Single/Dual LVDS Line Driver with Ultra-Low Differential Skew in SOT23
The MAX9110/MAX9112 single/dual low-voltage differential signaling (LVDS) transmitters are desig...
- Low 250ps (max) Pulse Skew for High-Resolution Imaging and High-Speed Interconnect
- Space-Saving 8-Pin SOT23 and SO Packages
- Pin-Compatible Upgrades to DS90LV017/017A and DS90LV027/027A (SO Packages)
- Guaranteed 500Mbps Data Rate
- Low 22mW Power Dissipation at 3.3V (31mW for MAX9112)
- Conform to EIA/TIA-644 Standard
- Single +3.3V Supply
- Flow-Through Pinout Simplifies PC Board Layout
- Driver Outputs High Impedance when Powered Off
MAX9112 Single/Dual LVDS Line Driver with Ultra-Low Differential Skew in SOT23
The MAX9110/MAX9112 single/dual low-voltage differential signaling (LVDS) transmitters are desig...
- Low 250ps (max) Pulse Skew for High-Resolution Imaging and High-Speed Interconnect
- Space-Saving 8-Pin SOT23 and SO Packages
- Pin-Compatible Upgrades to DS90LV017/017A and DS90LV027/027A (SO Packages)
- Guaranteed 500Mbps Data Rate
- Low 22mW Power Dissipation at 3.3V (31mW for MAX9112)
- Conform to EIA/TIA-644 Standard
- Single +3.3V Supply
- Flow-Through Pinout Simplifies PC Board Layout
- Driver Outputs High Impedance when Powered Off
Share
Request a Quote