Top
/content/maximintegrated/en/products/interface/isolation 
Isolation ICs (also called isolator ICs) provide complete galvanic isolation between two power domains. Isolation ICs protect circuits from high common-mode transients and faults and eliminate ground loops. Isolation ICs are commonly used in industrial communications and medical applications.
Digital Signal Isolators
Our digital signal isolator products provide up to 5kV of isolation and support data rates up to 200Mbps. Digital isolators are replacing optocouplers in many applications because they offer the same isolation capability while reducing power requirements and using less board space. Products are available for use with many industry communication standards.
When used with Maxim's industrial digital input level translator and serializers, these digital isolators provide a complete digital input solution that saves design space increases reliability, and reduces power requirements.
Looking for an isolated power solution? Visit our Isolated Power page.
Technical Documents
Browse Popular Technical Documents:
Technical Documentation
Featured Blogs
Customer Testimonials
Introduction to the MAX20328 MAX20328A MAX20328B MUX Switches for USB Type-C Audio Adapter Accessories
3:05 April 01, 2020
Introduction to the MAX20334 Overvoltage and Surge-Protected Dual SPDT Data Line Switch
2:40 April 29, 2019
Introduction to the MAX22195 High-Speed, Octal, Industrial Digital Input with Parallel Output
4:50 September 14, 2018
Featured Products
MAX22531 Field-Side Self-Powered, 4-Channel, 12-bit, Isolated ADC
The MAX22530–MAX22532 are galvanically isolated, 4-channel, multiplexed, 12-bit, analog-to-digit...
- Enable Robust Detection of Multichannel Analog/Binary Inputs
- Withstands 3.5kVRMS Isolation for 60s (VISO) for the SSOP Package
- Withstands 5kVRMS Isolation for 60s (VISO) for the Wide SOIC Package
- 5.5mm of Creepage and Clearance for 20-pin or 28-pin SSOP Package
- 8mm of Creepage and Clearance for 16-pin Wide SOIC Package
- Group II CTI Package Material
- Reduces BOM and Board Space Through High Integration
- Field-Side Self-Powered with Integrated DC-DC Supply
- 12-bit, 20ksps Per-Channel ADC
- Programmable Threshold Comparators for each Channel
- Isolation for both Data and DC-DC Supply
- Integrated 1.8V Reference
- Increase System “Up Time” and Simplifies System Design & Maintenance
- Field-Side ADC Functionality Diagnostics
- Field-Side Continuous Power Monitoring
- Communication System Self-Diagnostics
- Flexible Control and Interface
- Programmable Upper and Lower Input Threshold Enable Programmable Hysteresis
- Comparator Output (COUT_) Pins for Fastest Response
- SPI Interface with CRC Option
- Precision Internal Reference ±1% (typ)
- -40°C to +125°C Operating Temperature Range
MAX22532 Field-Side Self-Powered, 4-Channel, 12-bit, Isolated ADC
The MAX22530–MAX22532 are galvanically isolated, 4-channel, multiplexed, 12-bit, analog-to-digit...
- Enable Robust Detection of Multichannel Analog/Binary Inputs
- Withstands 3.5kVRMS Isolation for 60s (VISO) for the SSOP Package
- Withstands 5kVRMS Isolation for 60s (VISO) for the Wide SOIC Package
- 5.5mm of Creepage and Clearance for 20-pin or 28-pin SSOP Package
- 8mm of Creepage and Clearance for 16-pin Wide SOIC Package
- Group II CTI Package Material
- Reduces BOM and Board Space Through High Integration
- Field-Side Self-Powered with Integrated DC-DC Supply
- 12-bit, 20ksps Per-Channel ADC
- Programmable Threshold Comparators for each Channel
- Isolation for both Data and DC-DC Supply
- Integrated 1.8V Reference
- Increase System “Up Time” and Simplifies System Design & Maintenance
- Field-Side ADC Functionality Diagnostics
- Field-Side Continuous Power Monitoring
- Communication System Self-Diagnostics
- Flexible Control and Interface
- Programmable Upper and Lower Input Threshold Enable Programmable Hysteresis
- Comparator Output (COUT_) Pins for Fastest Response
- SPI Interface with CRC Option
- Precision Internal Reference ±1% (typ)
- -40°C to +125°C Operating Temperature Range
MAX22530 Field-Side Self-Powered, 4-Channel, 12-bit, Isolated ADC
The MAX22530–MAX22532 are galvanically isolated, 4-channel, multiplexed, 12-bit, analog-to-digit...
- Enable Robust Detection of Multichannel Analog/Binary Inputs
- Withstands 3.5kVRMS Isolation for 60s (VISO) for the SSOP Package
- Withstands 5kVRMS Isolation for 60s (VISO) for the Wide SOIC Package
- 5.5mm of Creepage and Clearance for 20-pin or 28-pin SSOP Package
- 8mm of Creepage and Clearance for 16-pin Wide SOIC Package
- Group II CTI Package Material
- Reduces BOM and Board Space Through High Integration
- Field-Side Self-Powered with Integrated DC-DC Supply
- 12-bit, 20ksps Per-Channel ADC
- Programmable Threshold Comparators for each Channel
- Isolation for both Data and DC-DC Supply
- Integrated 1.8V Reference
- Increase System “Up Time” and Simplifies System Design & Maintenance
- Field-Side ADC Functionality Diagnostics
- Field-Side Continuous Power Monitoring
- Communication System Self-Diagnostics
- Flexible Control and Interface
- Programmable Upper and Lower Input Threshold Enable Programmable Hysteresis
- Comparator Output (COUT_) Pins for Fastest Response
- SPI Interface with CRC Option
- Precision Internal Reference ±1% (typ)
- -40°C to +125°C Operating Temperature Range
MAX22820 Reinforced, Ultra-Low-Power, Two-Channel Digital Isolators
The MAX22_2_ are a family of 2-channel reinforced ultra-low-power digital isolators. The MAX22_2...
- Ultra-Low Power Consumption
- 11.4µA per Channel at DC with VDD = 3.3V
- 15.4µA per Channel at 100kbps with VDD = 3.3V
- 54.7µA per Channel at 1Mbps with VDD = 3.3V
- Wide Supply Range Supports from 1.71V to 5.5V
- Reinforced Galvanic Isolation for Digital Signals
- 8-NSOIC with 4mm Creepage and Clearance Withstands 3kVRMS for 60s (VISO) and Continuously Withstands 445VRMS (VIOWM)
- 8-WSOIC with 8mm Creepage and Clearance Withstands 5kVRMS for 60s (VISO) and Continuously Withstands 848VRMS (VIOWM)
- Withstands ±10kV Surge Between GNDA and GNDB with 1.2/50µs Waveform
- High CMTI (200kV/µs, min)
- Low Propagation Delay and Low Jitter
- Maximum Data Rate Up to 10Mbps
- Low Propagation Delay 51ns (typ) at VDD = 3.3V
- Clock Jitter RMS 15.4ps (typ)
- Safety Regulatory Approvals
- UL According to UL1577
- cUL According to CSA Bulletin 5A
- VDE 0884-11 Reinforced Insulation (Pending)
- IECEx and ATEX Intrinsic Safety (IS): Sira 0518 II 1G Ex ia IIC Ga (Pending)
MAX22421 Reinforced, Ultra-Low-Power, Two-Channel Digital Isolators
The MAX22_2_ are a family of 2-channel reinforced ultra-low-power digital isolators. The MAX22_2...
- Ultra-Low Power Consumption
- 11.4µA per Channel at DC with VDD = 3.3V
- 15.4µA per Channel at 100kbps with VDD = 3.3V
- 54.7µA per Channel at 1Mbps with VDD = 3.3V
- Wide Supply Range Supports from 1.71V to 5.5V
- Reinforced Galvanic Isolation for Digital Signals
- 8-NSOIC with 4mm Creepage and Clearance Withstands 3kVRMS for 60s (VISO) and Continuously Withstands 445VRMS (VIOWM)
- 8-WSOIC with 8mm Creepage and Clearance Withstands 5kVRMS for 60s (VISO) and Continuously Withstands 848VRMS (VIOWM)
- Withstands ±10kV Surge Between GNDA and GNDB with 1.2/50µs Waveform
- High CMTI (200kV/µs, min)
- Low Propagation Delay and Low Jitter
- Maximum Data Rate Up to 10Mbps
- Low Propagation Delay 51ns (typ) at VDD = 3.3V
- Clock Jitter RMS 15.4ps (typ)
- Safety Regulatory Approvals
- UL According to UL1577
- cUL According to CSA Bulletin 5A
- VDE 0884-11 Reinforced Insulation (Pending)
- IECEx and ATEX Intrinsic Safety (IS): Sira 0518 II 1G Ex ia IIC Ga (Pending)
MAX22821 Reinforced, Ultra-Low-Power, Two-Channel Digital Isolators
The MAX22_2_ are a family of 2-channel reinforced ultra-low-power digital isolators. The MAX22_2...
- Ultra-Low Power Consumption
- 11.4µA per Channel at DC with VDD = 3.3V
- 15.4µA per Channel at 100kbps with VDD = 3.3V
- 54.7µA per Channel at 1Mbps with VDD = 3.3V
- Wide Supply Range Supports from 1.71V to 5.5V
- Reinforced Galvanic Isolation for Digital Signals
- 8-NSOIC with 4mm Creepage and Clearance Withstands 3kVRMS for 60s (VISO) and Continuously Withstands 445VRMS (VIOWM)
- 8-WSOIC with 8mm Creepage and Clearance Withstands 5kVRMS for 60s (VISO) and Continuously Withstands 848VRMS (VIOWM)
- Withstands ±10kV Surge Between GNDA and GNDB with 1.2/50µs Waveform
- High CMTI (200kV/µs, min)
- Low Propagation Delay and Low Jitter
- Maximum Data Rate Up to 10Mbps
- Low Propagation Delay 51ns (typ) at VDD = 3.3V
- Clock Jitter RMS 15.4ps (typ)
- Safety Regulatory Approvals
- UL According to UL1577
- cUL According to CSA Bulletin 5A
- VDE 0884-11 Reinforced Insulation (Pending)
- IECEx and ATEX Intrinsic Safety (IS): Sira 0518 II 1G Ex ia IIC Ga (Pending)
MAX22420 Reinforced, Ultra-Low-Power, Two-Channel Digital Isolators
The MAX22_2_ are a family of 2-channel reinforced ultra-low-power digital isolators. The MAX22_2...
- Ultra-Low Power Consumption
- 11.4µA per Channel at DC with VDD = 3.3V
- 15.4µA per Channel at 100kbps with VDD = 3.3V
- 54.7µA per Channel at 1Mbps with VDD = 3.3V
- Wide Supply Range Supports from 1.71V to 5.5V
- Reinforced Galvanic Isolation for Digital Signals
- 8-NSOIC with 4mm Creepage and Clearance Withstands 3kVRMS for 60s (VISO) and Continuously Withstands 445VRMS (VIOWM)
- 8-WSOIC with 8mm Creepage and Clearance Withstands 5kVRMS for 60s (VISO) and Continuously Withstands 848VRMS (VIOWM)
- Withstands ±10kV Surge Between GNDA and GNDB with 1.2/50µs Waveform
- High CMTI (200kV/µs, min)
- Low Propagation Delay and Low Jitter
- Maximum Data Rate Up to 10Mbps
- Low Propagation Delay 51ns (typ) at VDD = 3.3V
- Clock Jitter RMS 15.4ps (typ)
- Safety Regulatory Approvals
- UL According to UL1577
- cUL According to CSA Bulletin 5A
- VDE 0884-11 Reinforced Insulation (Pending)
- IECEx and ATEX Intrinsic Safety (IS): Sira 0518 II 1G Ex ia IIC Ga (Pending)
MAX22421BSEVKIT Evaluation Kit for the MAX22420/MAX22421/MAX22820/MAX22821
The MAX22420/MAX22421 evaluation kits (EV kits) provide a proven design to evaluate the MAX22420...
- Ultra-Low-Power Operation
- Data Transfer Rates up to 10Mbps
- MAX22420 with 2:0 Channel Configuration MAX22421 with 1:1 Channel Configuration
- SMA Connectors for Easy Connection to External Equipment
- Wide Power Supply Voltage Range from 1.71V to 5.5V
- Guaranteed up to 3kVRMS Isolation for the 60s
- -40° C to +125° C Temperature Range
- Proven PCB Layout
MAX2242XSEVKIT Evaluation Kit for the MAX22420/MAX22421/MAX22820/MAX22821
The MAX22420/MAX22421 evaluation kits (EV kits) provide a proven design to evaluate the MAX22420...
- Ultra-Low-Power Operation
- Data Transfer Rates up to 10Mbps
- MAX22420 with 2:0 Channel Configuration MAX22421 with 1:1 Channel Configuration
- SMA Connectors for Easy Connection to External Equipment
- Wide Power Supply Voltage Range from 1.71V to 5.5V
- Guaranteed up to 3kVRMS Isolation for the 60s
- -40° C to +125° C Temperature Range
- Proven PCB Layout
MAX22163 Reinforced, Fast, Low-Power, Six-Channel Digital Isolators
The MAX22163−MAX22166 are a family of six-channel, reinforced, fast, low-power digital galvanic ...
- AEC-Q100 Qualification for /V Devices
- Reinforced Galvanic Isolation for Digital Signals
- 16-QSOP with 4mm Creepage and Clearance
- Withstands 3kVRMS for 60s (VISO)
- Continuously Withstands 445VRMS (VIOWM)
- Withstands ±10kV Surge Between GNDA and GNDB with 1.2/50µs Waveform
- High CMTI (50kV/µs, typ)
- Low Power Consumption
- 0.71mW per Channel at 1Mbps with VDD = 1.8V
- 1.34mW per Channel at 1Mbps with VDD = 3.3V
- 3.21mW per Channel at 100Mbps with VDD = 1.8V
- Low Propagation Delay and Low Jitter
- Maximum Data Rate up to 200Mbps
- Low Propagation Delay 7ns (typ) at VDD = 3.3V
- Clock Jitter RMS 11.1ps (typ)
- Safety Regulatory Approvals
- UL According to UL1577
- cUL According to CSA Bulletin 5A
- VDE 0884-11 Reinforced Insulation (Pending)
MAX22531 Field-Side Self-Powered, 4-Channel, 12-bit, Isolated ADC
The MAX22530–MAX22532 are galvanically isolated, 4-channel, multiplexed, 12-bit, analog-to-digit...
- Enable Robust Detection of Multichannel Analog/Binary Inputs
- Withstands 3.5kVRMS Isolation for 60s (VISO) for the SSOP Package
- Withstands 5kVRMS Isolation for 60s (VISO) for the Wide SOIC Package
- 5.5mm of Creepage and Clearance for 20-pin or 28-pin SSOP Package
- 8mm of Creepage and Clearance for 16-pin Wide SOIC Package
- Group II CTI Package Material
- Reduces BOM and Board Space Through High Integration
- Field-Side Self-Powered with Integrated DC-DC Supply
- 12-bit, 20ksps Per-Channel ADC
- Programmable Threshold Comparators for each Channel
- Isolation for both Data and DC-DC Supply
- Integrated 1.8V Reference
- Increase System “Up Time” and Simplifies System Design & Maintenance
- Field-Side ADC Functionality Diagnostics
- Field-Side Continuous Power Monitoring
- Communication System Self-Diagnostics
- Flexible Control and Interface
- Programmable Upper and Lower Input Threshold Enable Programmable Hysteresis
- Comparator Output (COUT_) Pins for Fastest Response
- SPI Interface with CRC Option
- Precision Internal Reference ±1% (typ)
- -40°C to +125°C Operating Temperature Range
MAX22532 Field-Side Self-Powered, 4-Channel, 12-bit, Isolated ADC
The MAX22530–MAX22532 are galvanically isolated, 4-channel, multiplexed, 12-bit, analog-to-digit...
- Enable Robust Detection of Multichannel Analog/Binary Inputs
- Withstands 3.5kVRMS Isolation for 60s (VISO) for the SSOP Package
- Withstands 5kVRMS Isolation for 60s (VISO) for the Wide SOIC Package
- 5.5mm of Creepage and Clearance for 20-pin or 28-pin SSOP Package
- 8mm of Creepage and Clearance for 16-pin Wide SOIC Package
- Group II CTI Package Material
- Reduces BOM and Board Space Through High Integration
- Field-Side Self-Powered with Integrated DC-DC Supply
- 12-bit, 20ksps Per-Channel ADC
- Programmable Threshold Comparators for each Channel
- Isolation for both Data and DC-DC Supply
- Integrated 1.8V Reference
- Increase System “Up Time” and Simplifies System Design & Maintenance
- Field-Side ADC Functionality Diagnostics
- Field-Side Continuous Power Monitoring
- Communication System Self-Diagnostics
- Flexible Control and Interface
- Programmable Upper and Lower Input Threshold Enable Programmable Hysteresis
- Comparator Output (COUT_) Pins for Fastest Response
- SPI Interface with CRC Option
- Precision Internal Reference ±1% (typ)
- -40°C to +125°C Operating Temperature Range
MAX22530 Field-Side Self-Powered, 4-Channel, 12-bit, Isolated ADC
The MAX22530–MAX22532 are galvanically isolated, 4-channel, multiplexed, 12-bit, analog-to-digit...
- Enable Robust Detection of Multichannel Analog/Binary Inputs
- Withstands 3.5kVRMS Isolation for 60s (VISO) for the SSOP Package
- Withstands 5kVRMS Isolation for 60s (VISO) for the Wide SOIC Package
- 5.5mm of Creepage and Clearance for 20-pin or 28-pin SSOP Package
- 8mm of Creepage and Clearance for 16-pin Wide SOIC Package
- Group II CTI Package Material
- Reduces BOM and Board Space Through High Integration
- Field-Side Self-Powered with Integrated DC-DC Supply
- 12-bit, 20ksps Per-Channel ADC
- Programmable Threshold Comparators for each Channel
- Isolation for both Data and DC-DC Supply
- Integrated 1.8V Reference
- Increase System “Up Time” and Simplifies System Design & Maintenance
- Field-Side ADC Functionality Diagnostics
- Field-Side Continuous Power Monitoring
- Communication System Self-Diagnostics
- Flexible Control and Interface
- Programmable Upper and Lower Input Threshold Enable Programmable Hysteresis
- Comparator Output (COUT_) Pins for Fastest Response
- SPI Interface with CRC Option
- Precision Internal Reference ±1% (typ)
- -40°C to +125°C Operating Temperature Range
MAX22820 Reinforced, Ultra-Low-Power, Two-Channel Digital Isolators
The MAX22_2_ are a family of 2-channel reinforced ultra-low-power digital isolators. The MAX22_2...
- Ultra-Low Power Consumption
- 11.4µA per Channel at DC with VDD = 3.3V
- 15.4µA per Channel at 100kbps with VDD = 3.3V
- 54.7µA per Channel at 1Mbps with VDD = 3.3V
- Wide Supply Range Supports from 1.71V to 5.5V
- Reinforced Galvanic Isolation for Digital Signals
- 8-NSOIC with 4mm Creepage and Clearance Withstands 3kVRMS for 60s (VISO) and Continuously Withstands 445VRMS (VIOWM)
- 8-WSOIC with 8mm Creepage and Clearance Withstands 5kVRMS for 60s (VISO) and Continuously Withstands 848VRMS (VIOWM)
- Withstands ±10kV Surge Between GNDA and GNDB with 1.2/50µs Waveform
- High CMTI (200kV/µs, min)
- Low Propagation Delay and Low Jitter
- Maximum Data Rate Up to 10Mbps
- Low Propagation Delay 51ns (typ) at VDD = 3.3V
- Clock Jitter RMS 15.4ps (typ)
- Safety Regulatory Approvals
- UL According to UL1577
- cUL According to CSA Bulletin 5A
- VDE 0884-11 Reinforced Insulation (Pending)
- IECEx and ATEX Intrinsic Safety (IS): Sira 0518 II 1G Ex ia IIC Ga (Pending)
MAX22421 Reinforced, Ultra-Low-Power, Two-Channel Digital Isolators
The MAX22_2_ are a family of 2-channel reinforced ultra-low-power digital isolators. The MAX22_2...
- Ultra-Low Power Consumption
- 11.4µA per Channel at DC with VDD = 3.3V
- 15.4µA per Channel at 100kbps with VDD = 3.3V
- 54.7µA per Channel at 1Mbps with VDD = 3.3V
- Wide Supply Range Supports from 1.71V to 5.5V
- Reinforced Galvanic Isolation for Digital Signals
- 8-NSOIC with 4mm Creepage and Clearance Withstands 3kVRMS for 60s (VISO) and Continuously Withstands 445VRMS (VIOWM)
- 8-WSOIC with 8mm Creepage and Clearance Withstands 5kVRMS for 60s (VISO) and Continuously Withstands 848VRMS (VIOWM)
- Withstands ±10kV Surge Between GNDA and GNDB with 1.2/50µs Waveform
- High CMTI (200kV/µs, min)
- Low Propagation Delay and Low Jitter
- Maximum Data Rate Up to 10Mbps
- Low Propagation Delay 51ns (typ) at VDD = 3.3V
- Clock Jitter RMS 15.4ps (typ)
- Safety Regulatory Approvals
- UL According to UL1577
- cUL According to CSA Bulletin 5A
- VDE 0884-11 Reinforced Insulation (Pending)
- IECEx and ATEX Intrinsic Safety (IS): Sira 0518 II 1G Ex ia IIC Ga (Pending)
MAX22821 Reinforced, Ultra-Low-Power, Two-Channel Digital Isolators
The MAX22_2_ are a family of 2-channel reinforced ultra-low-power digital isolators. The MAX22_2...
- Ultra-Low Power Consumption
- 11.4µA per Channel at DC with VDD = 3.3V
- 15.4µA per Channel at 100kbps with VDD = 3.3V
- 54.7µA per Channel at 1Mbps with VDD = 3.3V
- Wide Supply Range Supports from 1.71V to 5.5V
- Reinforced Galvanic Isolation for Digital Signals
- 8-NSOIC with 4mm Creepage and Clearance Withstands 3kVRMS for 60s (VISO) and Continuously Withstands 445VRMS (VIOWM)
- 8-WSOIC with 8mm Creepage and Clearance Withstands 5kVRMS for 60s (VISO) and Continuously Withstands 848VRMS (VIOWM)
- Withstands ±10kV Surge Between GNDA and GNDB with 1.2/50µs Waveform
- High CMTI (200kV/µs, min)
- Low Propagation Delay and Low Jitter
- Maximum Data Rate Up to 10Mbps
- Low Propagation Delay 51ns (typ) at VDD = 3.3V
- Clock Jitter RMS 15.4ps (typ)
- Safety Regulatory Approvals
- UL According to UL1577
- cUL According to CSA Bulletin 5A
- VDE 0884-11 Reinforced Insulation (Pending)
- IECEx and ATEX Intrinsic Safety (IS): Sira 0518 II 1G Ex ia IIC Ga (Pending)
MAX22420 Reinforced, Ultra-Low-Power, Two-Channel Digital Isolators
The MAX22_2_ are a family of 2-channel reinforced ultra-low-power digital isolators. The MAX22_2...
- Ultra-Low Power Consumption
- 11.4µA per Channel at DC with VDD = 3.3V
- 15.4µA per Channel at 100kbps with VDD = 3.3V
- 54.7µA per Channel at 1Mbps with VDD = 3.3V
- Wide Supply Range Supports from 1.71V to 5.5V
- Reinforced Galvanic Isolation for Digital Signals
- 8-NSOIC with 4mm Creepage and Clearance Withstands 3kVRMS for 60s (VISO) and Continuously Withstands 445VRMS (VIOWM)
- 8-WSOIC with 8mm Creepage and Clearance Withstands 5kVRMS for 60s (VISO) and Continuously Withstands 848VRMS (VIOWM)
- Withstands ±10kV Surge Between GNDA and GNDB with 1.2/50µs Waveform
- High CMTI (200kV/µs, min)
- Low Propagation Delay and Low Jitter
- Maximum Data Rate Up to 10Mbps
- Low Propagation Delay 51ns (typ) at VDD = 3.3V
- Clock Jitter RMS 15.4ps (typ)
- Safety Regulatory Approvals
- UL According to UL1577
- cUL According to CSA Bulletin 5A
- VDE 0884-11 Reinforced Insulation (Pending)
- IECEx and ATEX Intrinsic Safety (IS): Sira 0518 II 1G Ex ia IIC Ga (Pending)
MAX22421BSEVKIT Evaluation Kit for the MAX22420/MAX22421/MAX22820/MAX22821
The MAX22420/MAX22421 evaluation kits (EV kits) provide a proven design to evaluate the MAX22420...
- Ultra-Low-Power Operation
- Data Transfer Rates up to 10Mbps
- MAX22420 with 2:0 Channel Configuration MAX22421 with 1:1 Channel Configuration
- SMA Connectors for Easy Connection to External Equipment
- Wide Power Supply Voltage Range from 1.71V to 5.5V
- Guaranteed up to 3kVRMS Isolation for the 60s
- -40° C to +125° C Temperature Range
- Proven PCB Layout
MAX2242XSEVKIT Evaluation Kit for the MAX22420/MAX22421/MAX22820/MAX22821
The MAX22420/MAX22421 evaluation kits (EV kits) provide a proven design to evaluate the MAX22420...
- Ultra-Low-Power Operation
- Data Transfer Rates up to 10Mbps
- MAX22420 with 2:0 Channel Configuration MAX22421 with 1:1 Channel Configuration
- SMA Connectors for Easy Connection to External Equipment
- Wide Power Supply Voltage Range from 1.71V to 5.5V
- Guaranteed up to 3kVRMS Isolation for the 60s
- -40° C to +125° C Temperature Range
- Proven PCB Layout
MAX22163 Reinforced, Fast, Low-Power, Six-Channel Digital Isolators
The MAX22163−MAX22166 are a family of six-channel, reinforced, fast, low-power digital galvanic ...
- AEC-Q100 Qualification for /V Devices
- Reinforced Galvanic Isolation for Digital Signals
- 16-QSOP with 4mm Creepage and Clearance
- Withstands 3kVRMS for 60s (VISO)
- Continuously Withstands 445VRMS (VIOWM)
- Withstands ±10kV Surge Between GNDA and GNDB with 1.2/50µs Waveform
- High CMTI (50kV/µs, typ)
- Low Power Consumption
- 0.71mW per Channel at 1Mbps with VDD = 1.8V
- 1.34mW per Channel at 1Mbps with VDD = 3.3V
- 3.21mW per Channel at 100Mbps with VDD = 1.8V
- Low Propagation Delay and Low Jitter
- Maximum Data Rate up to 200Mbps
- Low Propagation Delay 7ns (typ) at VDD = 3.3V
- Clock Jitter RMS 11.1ps (typ)
- Safety Regulatory Approvals
- UL According to UL1577
- cUL According to CSA Bulletin 5A
- VDE 0884-11 Reinforced Insulation (Pending)
Share
Request a Quote