Product Details
Key Features
Applications/Uses
Charging VIN (V) (max) | 14 |
Max. ICHG (A) | 1.5 |
Cell Chemistry | Li-Ion Li-Polymer |
# Lithium Ion Cells | 1 2 3 |
Protected VIN (V) (max) | 14 |
Charger (V) | 4 to 13.2 |
Oper. Temp. (°C) | -40 to +85 |
Package/Pins | SSOP/28 |
Budgetary Price (See Notes) | 9.51 |
Simplified Block Diagram
Technical Docs
Data Sheet | Stand-Alone, Switch-Mode Li+ Battery Charger with Internal 14V Switch | Jun 08, 2015 | |
App Note | Efficiency Improvement in Battery Mode - MAX1737, MAX1757, MAX1758 |
Support & Training
Search our knowledge base for answers to your technical questions.
Filtered SearchOur dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .
Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact [email protected] with any questions regarding this Sample Site.
Parameters
Charging VIN (V) (max) | 14 |
Max. ICHG (A) | 1.5 |
Cell Chemistry | Li-Ion Li-Polymer |
# Lithium Ion Cells | 1 2 3 |
Protected VIN (V) (max) | 14 |
Charger (V) | 4 to 13.2 |
Oper. Temp. (°C) | -40 to +85 |
Package/Pins | SSOP/28 |
Budgetary Price (See Notes) | 9.51 |
Key Features
- Stand-Alone Charger Safely Charges Up to Three Li+ Batteries
- Continuous Voltage and Temperature Monitoring
- Input Current Limiting
- ±0.8% Battery Regulation Voltage Accuracy
- Up to 1.5A Programmable Charge Current
- Low Power Consumption Extends Battery Life
- 0.1µA Shutdown Battery Current
- Low-Dropout 98% Duty Cycle
- Flexible Input Voltage Range Enables the Use of Low Cost Wall Adapters
- Input Voltage Up to 14V
- Precharges Near-Dead Cells
- Fixed 300kHz PWM Oscillator Allows Effective Noise Filtering
- 28-Pin SSOP Package Saves Board Space
Applications/Uses
- Desktop Cradle Chargers
- Handheld Instruments (PDAs, Palmtops)
- Li+ Battery Packs
- Notebook Computers
- PDAs
Description
The MAX1757 regulates the voltage set point and charging current using two loops that work together to transition smoothly between voltage and current regulation. An additional control loop monitors the total current drawn from the input source (charging + system) and by automatically reducing battery-charging current prevents overload of the input supply, allowing the use of a low-cost wall adapter.
The per-cell battery regulation voltage is set between 4.0V and 4.4V using standard 1% resistors. The number of cells is set from 1 to 3 by pin strapping. Battery temperature is monitored by an external thermistor to prevent charging outside the acceptable temperature range.
The MAX1757 is available in a space-saving 28-pin SSOP package. Use the MAX1757EVKIT to help reduce design time. For a stand-alone charger with a 28V switch, refer to the MAX1758 data sheet. For a charger controller capable of up to 4A charging current, refer to the MAX1737 data sheet.
Technical Docs
Data Sheet | Stand-Alone, Switch-Mode Li+ Battery Charger with Internal 14V Switch | Jun 08, 2015 | |
App Note | Efficiency Improvement in Battery Mode - MAX1737, MAX1757, MAX1758 |
Support & Training
Search our knowledge base for answers to your technical questions.
Filtered SearchOur dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .
Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact [email protected] with any questions regarding this Sample Site.