MAX17703
4.5V to 60V, Synchronous Step-Down Li-Ion Battery Charger Controller
Wide Input Voltage, High-Efficiency, Switching Super Cap Battery Charger
MyMaxim SubscriptionsProduct Details
Key Features
Applications/Uses
| Charging VIN (V) (max) | 60 |
| Max. ICHG (A) | 1-20 |
| Cell Chemistry | Li-Ion Li-Polymer LiFePO4 |
| # Lithium Ion Cells | 12 |
| Protected VIN (V) (max) | 60 |
| Charger (V) | 1.25 to 56 |
| Oper. Temp. (°C) | -40 to +125 |
| Package/Pins | TQFN-CU/24 |
| Budgetary Price (See Notes) | 2.81 |
Simplified Block Diagram
Technical Docs
| Data Sheet | 4.5V to 60V, Synchronous Step-Down Li-Ion Battery Charger Controller | Feb 17, 2022 |
Support & Training
Search our knowledge base for answers to your technical questions.
Filtered SearchOur dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .
Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact [email protected] with any questions regarding this Sample Site.
Parameters
| Charging VIN (V) (max) | 60 |
| Max. ICHG (A) | 1-20 |
| Cell Chemistry | Li-Ion Li-Polymer LiFePO4 |
| # Lithium Ion Cells | 12 |
| Protected VIN (V) (max) | 60 |
| Charger (V) | 1.25 to 56 |
| Oper. Temp. (°C) | -40 to +125 |
| Package/Pins | TQFN-CU/24 |
| Budgetary Price (See Notes) | 2.81 |
Key Features
- Optimized Feature-Set for Li-Ion Batteries Including Li-Polymer, LiFePO4 and Li-Titanate
- ±4% Charging Current Regulation Accuracy
- ±6% Charging Current Monitor Accuracy (ISMON) ,
- ±1% Voltage Regulation Accuracy
- Programmable Constant Current (CC) Mode Charging Current (ILIM)
- Charge Termination on Full Battery Detection with Taper Current Threshold and Taper Timer
- Wide 4.5V to 60V Input-Voltage Range
- Adjustable Output-Voltage Range from 1.25V up to (VDCIN - 2.1V)
- 125kHz to 2.2MHz Adjustable Frequency with External Clock Synchronization (RT/SYNC)
- Reliable Operation in Adverse Environmental Conditions
- Input Short-Circuit Protection (GATEN)
- Safety Timer Feature (TMR)
- Deeply Discharged Battery Detection and Preconditioning (DDTH)
- Battery Temperature Sensing and Charge when Within Temperature of Range (TEMP)
- Cycle-by-Cycle Overcurrent Limit
- Programmable EN/UVLO Threshold
- Status Output Monitoring Using Open-Drain Outputs (FLG1 and FLG2)
- Overtemperature Protection
- Complies with CISPR 32 (EN55032) Class B Conducted and Radiated Emissions
- Wide -40°C to +125°C Ambient Operating Temperature Range/ -40°C to +150°C Junction Temperature Range
Applications/Uses
- Battery Backup for Lighting, Security Cameras, and Control Panels
- Building and Home-Automation Backup Power
- Industrial Battery Charging and Energy Storage
- Portable Industrial and Medical Equipment
- Power Tools and Handheld Terminals
Description
The Himalaya series of voltage regulator ICs, power modules, and chargers enable cooler, smaller, and simpler power supply solutions. The MAX17703 is a high-efficiency, high-voltage, synchronous, step-down, Himalaya Li-ion battery-charger controller designed to operate over an input-voltage range of a 4.5V to 60V. The MAX17703 operates over a wide -40°C to +125°C temperature range and offers a complete charging solution for Li-ion batteries with a ±4% accurate constant current. The output voltage is programmable from 1.25V up to (VDCIN - 2.1V) with ±1% regulation accuracy.
The device uses an external nMOSFET to provide input supply-side short-circuit protection, preventing battery discharge.
The device charges the battery in constant current (CC) and constant voltage (CV) states and terminates in a top-up-charge state after the taper timer is elapsed. The device resumes charging automatically when the battery voltage falls below the recharge voltage threshold. Detection and preconditioning of deeply discharged batteries are enabled by a deep discharge detection comparator.
The MAX17703 is available in a 24-pin 4mm x 4mm TQFN package with an exposed pad.
Technical Docs
| Data Sheet | 4.5V to 60V, Synchronous Step-Down Li-Ion Battery Charger Controller | Feb 17, 2022 |
Support & Training
Search our knowledge base for answers to your technical questions.
Filtered SearchOur dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .
Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact [email protected] with any questions regarding this Sample Site.
Request a Quote