/
/
/
Linear Regulators (LDOs) 
/
Top ![]()
MAX5093
4V to 72V Input LDOs with Boost Preregulator
Input LDOs with Boost Preregulators Operate Seamlessly from 4V Cold Crank to 72V Load Dump
MyMaxim SubscriptionsProduct Details
Key Features
Applications/Uses
Parametric specs for Step-Down/Up Switching Regulators
| VIN (V) (min) | 3.5 |
| VIN (V) (max) | 72 |
| VOUT1 (V) (min) | 1.5 |
| VOUT1 (V) (max) | 10 |
| IOUT1 (A) (max) | 0.25 |
| Switch Type | Internal |
| Output Adjust. Method | Preset Resistor |
| ICC (mA) (max) | 0.085 |
| # DC-DC Outputs | 1 |
| # LDO/ Op.Amp. Outputs | 1 |
| Package/Pins | TQFN/16 |
Parametric specs for Linear Regulators
| VIN (V) (min) | 3.5 |
| VIN (V) (max) | 72 |
| Adj. VOUT (V) (min) | 1.5 |
| Adj. VOUT (V) (max) | 10 |
| Rated ILOAD (mA) | 250 |
| Preset VOUT (V) | 5 |
| # Regulators | 1 |
| VDROPOUT @Rated ILOAD (V) (typ) | 0.9 |
| ICC (µA) (max) | 85 |
| Low Batt./ Pwr. Fail Out | No |
| POK/Reset Thresh. (V) (nom) | Vout-10% |
| Watchdog | No |
| Reverse Batt. Protect. | No |
| Oper. Temp. (°C) | -40 to +125 |
| Package/Pins | TQFN/16 |
| Budgetary Price (See Notes) | 1.9 |
View More
Simplified Block Diagram
Support & Training
Search our knowledge base for answers to your technical questions.
Filtered SearchOur dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .
Parameters
Parametric specs for Step-Down/Up Switching Regulators
| VIN (V) (min) | 3.5 |
| VIN (V) (max) | 72 |
| VOUT1 (V) (min) | 1.5 |
| VOUT1 (V) (max) | 10 |
| IOUT1 (A) (max) | 0.25 |
| Switch Type | Internal |
| Output Adjust. Method | Preset Resistor |
| ICC (mA) (max) | 0.085 |
| # DC-DC Outputs | 1 |
| # LDO/ Op.Amp. Outputs | 1 |
| Package/Pins | TQFN/16 |
Parametric specs for Linear Regulators
| VIN (V) (min) | 3.5 |
| VIN (V) (max) | 72 |
| Adj. VOUT (V) (min) | 1.5 |
| Adj. VOUT (V) (max) | 10 |
| Rated ILOAD (mA) | 250 |
| Preset VOUT (V) | 5 |
| # Regulators | 1 |
| VDROPOUT @Rated ILOAD (V) (typ) | 0.9 |
| ICC (µA) (max) | 85 |
| Low Batt./ Pwr. Fail Out | No |
| POK/Reset Thresh. (V) (nom) | Vout-10% |
| Watchdog | No |
| Reverse Batt. Protect. | No |
| Oper. Temp. (°C) | -40 to +125 |
| Package/Pins | TQFN/16 |
| Budgetary Price (See Notes) | 1.9 |
Key Features
- Wide Operating Input Voltage Range: 3.5V to 72V with a 4V Startup Voltage
- LDO Output Regulates to 5V Seamlessly from an Input Voltage of 3.5V to 72V
- Up to 250mA Output Current
- Preset 3.3V, 5V, or Externally Programmable LDO Output Voltage from 1.5V to 9V (MAX5092_) or from 1.5V to 10V (MAX5093_)
- Preset 7V or Externally Programmable Boost Output Voltage Up to 11V (MAX5092_) or Up to 12V (MAX5093_)
- 65µA Quiescent Current in LDO Mode (VIN ≥ 8V)
- 5µA Shutdown Current
- Power-On Reset (Active-Low RESET) with Programmable Timeout Period
- Output Short-Circuit and Thermal Protection
- TQFN Package Capable of Dissipating up to 2.7W at +70°C
Applications/Uses
- Industrial
Description
The MAX5092A/MAX5092B/MAX5093A/MAX5093B low-quiescent-current, low-dropout (LDO) regulators contain simple boost preregulators operating at a high frequency. The devices seamlessly provide a preset 3.3V (MAX5092A/MAX5093A) or 5V (MAX5092B/MAX5093B) LDO output voltage from a cold-crank through load-dump (3.5V to 80V) input voltage conditions. The MAX5092_/MAX5093_ deliver up to 250mA with excellent load and line regulation. During normal operation, when the battery is healthy, the boost preregulator is completely turned off, reducing quiescent current to 65µA (typ). This makes the devices suitable for always-on power supplies.
The buck-boost operation achieved by this combination of LDO and boost preregulator offers the advantage of using a single off-the-shelf inductor in place of the multiple- winding custom magnetics needed in typical single- ended primary inductor converter (SEPIC) and transformer-based flyback topologies. The high operating frequency of the boost regulator significantly reduces component size. The MAX5092_ integrates a blocking diode to further reduce the external component count. The boost preregulator output voltage is preset to 7V. Both LDO and boost output voltages are programmable using external resistors. The boost preregulator output voltage is adjustable up to 11V (MAX5092_), or up to 12V (MAX5093_). The LDO output voltage is adjustable from 1.5V to 9V (MAX5092_) or from 1.5V to 10V (MAX5093_).
The devices feature a shutdown mode with 5µA (typ) shutdown current, a active-low HOLD input to implement a self-holding circuit, and a power-on-reset output (active-low RESET) with an externally programmable timeout period. Additional features include output overload, short-circuit, and thermal protection.
The MAX5092_/MAX5093_ are available in a thermally enhanced, 16-pin 5mm x 5mm thin QFN package and can dissipate up to 2.7W at +70°C on a multilayer PC board.
The buck-boost operation achieved by this combination of LDO and boost preregulator offers the advantage of using a single off-the-shelf inductor in place of the multiple- winding custom magnetics needed in typical single- ended primary inductor converter (SEPIC) and transformer-based flyback topologies. The high operating frequency of the boost regulator significantly reduces component size. The MAX5092_ integrates a blocking diode to further reduce the external component count. The boost preregulator output voltage is preset to 7V. Both LDO and boost output voltages are programmable using external resistors. The boost preregulator output voltage is adjustable up to 11V (MAX5092_), or up to 12V (MAX5093_). The LDO output voltage is adjustable from 1.5V to 9V (MAX5092_) or from 1.5V to 10V (MAX5093_).
The devices feature a shutdown mode with 5µA (typ) shutdown current, a active-low HOLD input to implement a self-holding circuit, and a power-on-reset output (active-low RESET) with an externally programmable timeout period. Additional features include output overload, short-circuit, and thermal protection.
The MAX5092_/MAX5093_ are available in a thermally enhanced, 16-pin 5mm x 5mm thin QFN package and can dissipate up to 2.7W at +70°C on a multilayer PC board.
Support & Training
Search our knowledge base for answers to your technical questions.
Filtered SearchOur dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .
Request a Quote