製品の詳細
主な特長
アプリケーション/用途
Charging VIN (V) (max) | 7 |
Max. ICHG (A) | 0.8 |
Cell Chemistry | Li-Ion Li-Polymer |
# Lithium Ion Cells | 1 |
Protected VIN (V) (max) | 13 |
Charger (V) | 4.2 |
Oper. Temp. (°C) | -40 to +85 |
Package/Pins | TDFN/8 |
Budgetary Price (See Notes) | 2.4 |
簡易ブロック図
Technical Docs
データシート | パスFET、サーマルレギュレーション、およびACOKフラグ内蔵、リニアLi+ (リチウムイオン)バッテリチャージャ、3mm x 3mm TDFN | Sep 16, 2005 |
サポートとトレーニング
技術質問への回答についてはナレッジベースで検索ください。
絞り込まれた検索マキシムでは、お客様の技術的質問にお答えするため、アプリケーションエンジニアの専任チームも配置しています。 サポートセンター をご利用ください。
サンプルについて:
サンプルは、外部のADI Sample Siteでのご注文となります。選択したパーツはSample Siteログイン後、カートに引き継がれます。Sample Siteを初めて使用する際は、アカウント登録をお願いいたします。Sample Siteに関するご質問は、[email protected]までお問合せください。
パラメーター
Charging VIN (V) (max) | 7 |
Max. ICHG (A) | 0.8 |
Cell Chemistry | Li-Ion Li-Polymer |
# Lithium Ion Cells | 1 |
Protected VIN (V) (max) | 13 |
Charger (V) | 4.2 |
Oper. Temp. (°C) | -40 to +85 |
Package/Pins | TDFN/8 |
Budgetary Price (See Notes) | 2.4 |
主な特長
- Stand-Alone Linear 1-Cell Li+ Battery Charger
- No External FET, Reverse-Blocking Diode, or Current-Sense Resistor Required
- Programmable Fast-Charge Current (0.8A max)
- Proprietary Die-Temperature Regulation Control (+100°C)
- +4.25V to +13V Input Voltage Range with Input Overvoltage Protection (OVP) Above +7V
- Charge-Current Monitor for Fuel Gauging
- Low Dropout Voltage—130mV at 0.425A
- Input Power-Source Detection Output (Active-Low ACOK)
- Soft-Start Limits Inrush Current
- No Prequalification State for the MAX1508Y and MAX1508Z
- Charge Status Output (Active-Low CHG) for LED or Microprocessor Interface
- Small 3mm x 3mm 8-Pin Thin DFN Package, 0.8mm High
- Active-Low Charge Enable (Active-Low EN) (MAX1508 and MAX1508Z)
- Active-High Charge Enable (EN) (MAX1508Y)
アプリケーション/用途
- Bluetooth®機器
- 携帯電話/コードレス電話
- 充電用クレードルおよびドック
- デジタルカメラおよびMP3プレーヤー
- PDA
- USBアプライアンス
説明
The MAX1508 functions as a stand-alone charger to control the charging sequence from the prequalification state through fast-charge, top-off charge, and full-charge indication. The MAX1508Y and MAX1508Z eliminate the prequalification state to allow startup into a load without a battery.
Proprietary thermal-regulation circuitry limits the die temperature to +100°C when fast charging or while exposed to high ambient temperatures, allowing maximum charging current without damaging the IC.
The MAX1508 achieves high flexibility by providing an adjustable fast-charge current by an external resistor. Other features include the charging status (active-low CHG) of the battery, an active-low control input (active-low EN) for the MAX1508 and MAX1508Z (active-high control input for the MAX1508Y), and an active-low input power-source detection output (active-low ACOK).
The MAX1508 accepts a +4.25V to +13V supply, but disables charging when the input voltage exceeds +7V to protect against unqualified or faulty AC adapters. The MAX1508 operates over the extended temperature range (-40°C to +85°C) and is available in a compact 8-pin thermally enhanced 3mm x 3mm thin DFN package with 0.8mm height.
Technical Docs
データシート | パスFET、サーマルレギュレーション、およびACOKフラグ内蔵、リニアLi+ (リチウムイオン)バッテリチャージャ、3mm x 3mm TDFN | Sep 16, 2005 |
サポートとトレーニング
技術質問への回答についてはナレッジベースで検索ください。
絞り込まれた検索マキシムでは、お客様の技術的質問にお答えするため、アプリケーションエンジニアの専任チームも配置しています。 サポートセンター をご利用ください。
サンプルについて:
サンプルは、外部のADI Sample Siteでのご注文となります。選択したパーツはSample Siteログイン後、カートに引き継がれます。Sample Siteを初めて使用する際は、アカウント登録をお願いいたします。Sample Siteに関するご質問は、[email protected]までお問合せください。